cmr1991

You would prefer it in a perm fixed position, with a Usb lead ran down the back which you can plug into the HU- that way it will charge when the engine is running and power on only by the engine running, obviously it will hold charge as normal once charged. To stream it you can do that wirelessly via the laptop (Y) I Think its just best for me to do three units here as a prototype, 1 ) Ipad mini in fixed position. 2) Ipad mini with a fixed case but you can easily pop the mini in and out, however there would be no USB attached as the case would be so tight that you can slot it into place. 3) the larger iPad style. I shall get to work on it

another Idea for you folks - This is a fixed iPad Mini, However I could design it on the same basis but in a removable slim line case, that you could take your mini in and out of. Streaming etc wouldnt be an issue as you could do it via bluetooth or wifi with the Right HU.

I can Imagine the iPad Mini set-up will the most popular here. The only issue wit that iPad mini install is that its fixed, but I will be able to work around that and have two options. With it being fixed again, a switch of some-sorts will have to be - relocated to turn on/off and lock the device, which would be costly and basically taking the Mini apart. However, I think, A fixed case build into the centre console, with a cubby lid (probably custom made, like a slide down version or similar) can be fabricated, that the iPad fixes in and out of what not in use. all fiberglassed in so it looks stock. Throw your ideas at me folks and I will get working on some designs and ideas later on this week Maybe set up your ideas in clear bullet points so I can just grab the details and brain storm them all together : for instance - Ipad Mini - Horizontally -Fixed case but removable iPad. - Charging dock built in not necessary but the option has to be there to use the AUX cable/usb sock on the mini to run music through - Cubby lid needs to stay intact, or like Vlads Photo it doesn't really matter.

I agree the iPad mini does look good - The design can vary depending on the iPad/Tablet, Sadly the full size iPad won't go horizontally on the centre console, but the iPad mini for instance will. Also, would a charing dock be something that you could class as a "MUST HAVE" or more of an option to plug and play with the USB and access to the AUX port of the iPad Also The iPad install is easy to make it removable, the iPad mini looks fixed, however I am sure that I could design almost like a case that fits the iPad mini that just slots into the adapted centre console.

Hey, Talking pounds and pence, if you wanted one : (NOT SUPPLYING YOUR OWN CENTRE CONSLE) we would be talking in the region of £230 - that is in gloss black. (SUPPLYING YOUR OWN CONSOLE) On a post to me I post back scenario - £150 - that again is in gloss black. I will also like to add on this point that you do not need to post me your console until yours is ready to be shipped out, so you don't have to take it out your car until its completed. Other styles again will vary on price, It will be made of fibreglass, can also be hydro-dipped (we don't do hydro-dipping but use a company that does, so we can get it cheaper) Obviously I do not supply the iPads.Tablets. Price will drop if we have an order of 3 or 4 for the same model of tablet/ipad) I think the price is fair compared to the amount of work that will be needed, Regards

Hey All, We currently have a sale going on - we will soon be updating our homepage www.custom-creationz.co.uk with the sale section but for now you can get ahead of the sale on eBay: Boot Dividers: http://www.ebay.co.u...=item1c42d07f29 Under rear Strut Subwoofer enclosures x1 10inch (custom hole can be drilled if required) http://www.ebay.co.u...=item1c42ed51a0 Under rear Strut Subwoofer enclosures x2 10inch ((custom hole can be drilled if required) http://www.ebay.co.u...=item1c428ed447 Or just go to my members traders section here : http://www.350z-uk.c...ures-and-parts/ Shoot me a message here, via ebay or my website, you can make payment via website using paypal, credit or debit cards. (PSSSST, I Will knock off a further 10% for any members that buy off me directly through the forum - just message me )

Hi all, We are debating in starting making a prototype version of this : It can house an iPad, or Tablet. there will be a built in housing dock so it charges when the car is running etc. We would like some strong interest before we start making these, Yes, No, YEs and why, no and why not? What would you like to see, what wouldn't you like to see? just a bit of general market research. Colours of the console can be pretty much any you desire, or in any material. Regards

I would like to thank ATTAKZ for the drawings, they were perfect and just exactly what I needed, Top marks thank you very much

Fair play, that is possible the cleanest, nicest, colour combo I have ever seen on a Z.. infact in almost any engine bay for a custom Jobby!

Hello and welcome Pictures please, what colour did you go for?

Hello and welcome to the forum

I agree that he has a talent, just a shame that he also likes a chew amongst many other sly incidents. I am an everton fan however... so always going to be biased! http://www.ebay.co.u...=item1c42c79013

I got ya matey! All info has been sent to you via ebay message. Thank you

I have just ordered a bunch of these from my supplier, Pretty funny and I thought a lot of you football guys may be interest in there http://www.ebay.co.uk/itm/Luis-Suarez-Bite-Bottle-Opener-World-Cup-2014-Uruguay-Liverpool-Barcelona-/121379459091?pt=UK_Collectables_Breweriana_SM&hash=item1c42c79013 Take a peak, please read the full listing, regards

For whatever reason I can't see the pictures? Can you PM me some please or pop up a link here thanks

Hello and welcome

It still here folks, I have replied to your mail doc

Brillant Thank you very much I shall shoot my templates over to you now with a little bit of info

Hello All, IS anyone any good with CAD? I need a little help , I need 3 simple shapes (two rectangles and 1 trapezium) Made up in CAD as a .DXF file ideally.. I am willing to make a contribution ££ if your able to help me out please shoot me message and I can send you the shapes and dimensions. regards

Hi matey, Yes I actually have some drawings and ideas for the original sub enclosure, I have one with sub facing forward and one with the subwoofer facing down. Shoot me a message if its something you would like to discuss a little further.

Don't forget folks, IF your ordering a subwoofer box, it will be nice to know what subwoofer you plan to put in there, as these are custom made we make them to fit your subwoofer! if not a standard 10 inch box goes out. Each subwoofer sometimes has a different mounting diameter to the actual sub size, we like to make sure everything fits perfectly! Also, shoot me a message here first I am sure I can help you out in numbers ways, I am in the middle of building a full install for a customers 350z show car, I will be making a progress page and putting it up on our website, The only limit is your imagination... kind of! I like to make prototypes and give customers new ideas, Currently building a pack panel for behind the drivers and passenger seat which takes away the glove box and old Subwoofer so two amps can be mounted there... well two anything you wish really! Tvs.. Fish tanks, mini fridge, microwave.. :lol:

I see this car pretty much every day - In the car park.. I won't say where you park it but I go to the Gym a few buildings down from where you park it (I assume you work close) The car is immaculate, I don't think I have ever see the car dirty, it is constantly stunning! Good luck with your sale!

That is perfect thank you very much I have just mailed you a 20% discount code for anything you may fancy on www.custom-creationz.co.uk to say thank you for your time. Lots of new stuff being added daily regards

Hi all, Would anyone be kind enough to help a photoshop novice out? I would like this image : but on a black background not a white background, it is a logo for my shop. - Thank you in advance.