valy

15 hours ago, Z4ZORRO said:

Only item left is the Stillen. It takes the sound of the car to another level in my opinion, never noticed any heat soak issues but I never sat in traffic in heat etc in my Nismo. Bet it’s only covered 5k max. Grab a bargain lads 🙂

might be interested in it ,can you send me a dm on it thanks

25 minutes ago, Silverthorn said:

Tucked Meet & Eat Pt3 completed. An awesome show at an awesome venue, I'd highly recommend it to all!

 

Here's a few photos of the car at the event, all captured by @24sevenphotography on Instagram:

 

 

 

 

 

 

 

 

 

 

damn that is low haha,well done on the prize  well deserved

also cool shots !

1 hour ago, StormtrooperZ said:

Are you running spacers?  

yes I am running spacers all around

ok,so I can confirm now that it was indeed the wheel bearing hub making the noise.

New one is in and problem sorted 

2 hours ago, Ebized said:

Have you checked between the disc and dust shield and spun the wheel off the ground?  Not uncommon for stones etc to get lodged there.

yes,did this as one of the first checks when I started hearing the noise

quick update,fitted the tie rods but hasn't sorted the problem so onto the next idea which is getting a new wheel bearing hub 

5 minutes ago, Silverthorn said:

@valy Honestly, i usually just go with whichever is available on the best deal on Autodoc - I believe i paid about £10 or so per tie rod from them. Postage can be a little bit expensive so if you have any other maintenance items you want to purchase, try and get them all in one order to save a few ££.

 

It's a shame you're as far away as you are as i have two almost brand new tie rods just sat here as i fitted them and then removed them a month later when i fitted the GKtech kit.

If they are good and you want to get rid of them I can have yours mate if you can post them to me,I am happy to cover the postage as won't be much.just send me a dm and will arrange all 

15 minutes ago, Silverthorn said:

I'd be surised if the lower arm bushes were at fault - they're not as big of a problem as they were with the 350z's.

 

By the fact the noise changes with steering angle, I can only assume it'd be your tie rod as components like your drop links mount to the LCA so the noise shouldn't change by turning the wheel.

thanks mate,tie rods are cheaper then a lower arm so might try this in the first instance and get both sides done

any suggestions on brands?

20 minutes ago, StormtrooperZ said:

I have something similar, but driverside rear. I believe it's the ARB drop link on mine. 

I had this on the back as well from the axle which is well known bug on the 370's ,but just had it sorted and upgraded with a kawasaki castellated axle nut 

Hi gents!

Got an annoying clicking noise from the suspension on the driver side front of my 370 but unsure what exactly is.

Gets worst when turning left and goes when driving straight

Are these the bushings in the lower arm perhaps? do they usually get changed or a new lower arm is required if this is the problem?

Thanks

13 hours ago, Mat C said:

Due to an ex fox i need a 2010 370Z bumper in Magnetic Black (G41).

got one in G41 that I took of my 2010 370z GT available,just send me a dm and will provide more details

 now this type of project I do like  looking forward to seeing how this takes shapes 

a Nismo will hold value better over time and if you have the money you are probably better off getting one

looking better and better mate, definitely one of the coolest zeds in the UK  

2 hours ago, ZMANALEX said:

What spring washer are you referring to?

I think there is a spring washer (40037-1CA0A) that goes on before the nut and apparently when using the kawasaki nuts an extra one on each side is needed to bring the nut forward a bit(I am reusing the ones I already have on there but need an extra 2),hope it makes sense

is that because of the axle click noise?

I am also doing mine now but decided to go the Kawasaki axle nut way

@ZMANALEX can you please send me also a pm if you do the oem cotter pins (x2) and oem spring washers (x 2) ,370z gt 2010 

looked at this as well but there was an even better one that went for £300 last week...made an offer on it but was snapped up soon after...

motordyne paired with art pipes sounds amazing!

had it on my 350 and now also wanting one for my 370  that will be my choice 

Headlights now sold,mods please lock,thank you

Not available now,mods please lock ,thank you

Hi,

I run bmw wheels pcd on my zed and use a 15mm front and 25mm rear adapters,not many good ones available there though,I run H&R ones 

looking good Adam  glad someones looking after it as it's a nice build

bump bump still for sale, accepting offers on them 

unless we went back in the time machine to 2010 Veilside is a bit outdated... and I actually owned one as well which was not bad 

10 minutes ago, zed_mirza said:

hi are these still for sale ?

 

Yes,just replied to your DM now