mattfinch

This has probably come up but so you can get into the back glove box there is a lever on the back off the passenger seat so you can tilt it forward wile sitting in the drives seat to get into the glove box or the secret bit under the glove box carpet.

Everything is set to off. I think I will have to take a look at the ribbon see if its come a bit loose. Cheers for the help

Yes I had it all out when I changed my head unit. Was very hard/tight to get it all back in so may be something to do with that then. But that was months ago and this has only started doing this over the last few weeks.

Hi all

Just wondering if this happens to any one else.

Every now and then I start my drive and about 2mins in the in car heater blowers blast air out at speed for about 10sec then turn off.

Anyone know if this is a normal thing, only been doing it when the weather has been hot did not know if its the car telling me it wants the air con on lol.

Thanks

Ok mate will do. Im going to ring the place that done mine just to make sure its ok

Thanks guys this has helped out, The people who done the bumper for me said that they have baked it in their ovens to dry the paint and they have also washed the car after. I think if I spray the bumper this weekend coming it should be alright to do by then.

I have heard you should not wax it for about a month as well. I'll just leave it for a few weeks just to be safe. Thanks again

Ok thanks for that, I thought that might be the case but thought I would check to be on the safe side

Hello all

I used to have my front bumper lip plasti dipped in black and a few weeks ago someone hit my car. Their insurance paid for me to have a new bumper and I have just got it back today.

Will it be alright for me to spray the bumper lip in black plasti dip again or will I need to leave the new paint for a few weeks or months first.

Any advise would be great.

Thanks

The best time to reset it is when your rolling along in neutral. See how high you can get your MPG

Once you put the new one on you will wish you had done it earlier

NaanH I have the Cobra non resonated system and I don't really get any excessive cabin noise so the resonated one will be fine for what you are looking for and it is a really nice piece of kit and sounds great when you want to put your foot down a bit

I see you have a gunmetal car and have mentioned that you're looking to spray things black.

 

Please DO NOT buy, or be tempted by gunmetal plastidip. It does not look like gunmetal.

 

Trust me, I know....

Thanks for that. I was just going to do a few bit black but if I see gun metel coulor I will make sure I walk away mate.

Thanks

Hi all

I am looking to spray my badges, door handles and front bumper lip in black with this Plasti Dip stuff. Has many people used this stuff before and is it really that easy as just spray the coats on and peel off the bits you don't need.

If anyone has any pictures of what they have done that would help me out too.

Thanks

Ok mate thanks for the advise

Thanks CS I will have a look at the pictures on facebook, looks like I will be buying from you again soon

Hi all

I'am looking to lower my car by 30mm but I also want 25mm spacers on the rear and 20mm spacers on the front.

If i put this sut up of spacers on my car and then lower by 30mm will I have any problems, such as rubbing or knocking?

Any help would be great.

Thanks

Just to let you know I have a late 55 plate and you can turn of the hijack locking mode but can't put the windows down if that helps

Maybe the windows only go down after you have turned of the hijack mode?

I can't believe that was in you engine bay and also can't believe they don't want you to drive your car until the end of the mating season

http://www.350z-uk.c...e-installation/

 

I know your not changing badges but it shows how they come off, and you will need glue or some adhesive to put the front one back on I think

Cheers for that mate, I think I'm going to take them of spray them black and stick them back on

Thanks, If I take them off to spray are they just stuck on the bodywork and would just be a case of sticking them back on after?

Hi all

I am looking at getting some black badges but the only ones I can find are the badges with the Z in the middle. Does anyone know if you can get the normal badge that says Nissan on it but in black, or would it just be a case of me spraying them black.

Thanks