Jump to content

lovie

Members
  • Posts

    106
  • Joined

  • Last visited

Posts posted by lovie

  1. Hello all,

    Thanks to all those who have posted info on this site, after reading how to remove door panel I thought I would have a go and post some pics.

    I had wind noise and leaks from driver door glass, it wasn't sealing against rubber seal at the front edge and also the glass wasn't leaning in enough.

    I adjusted the glass by loosening the two bolts that hold the glass and relocating the glass a few mm further forward and a few mm higher. I tried to also adjust the angle of the glass by adjusting the lock nuts/ slotted screw which I think is meant to change the angle but I couldn't get it to make any difference. (any comments or help on this gratefully received)

    In summary I have moved the glass to provide a better seal and up to 70mph it now has no wind noise. This is my attempt and I am certainly no expert so my advice is here purely as help and I cannot be responsible if everything I say is pants and your door falls off after following this guide. Or anything else go wrong, generally.

     

    How it should be (passenger side)

    2012-06-25135907.jpg

     

    How it shouldn't be (drivers side)

    2012-06-25135923.jpg

     

    £15 from Amamzon for main black pack with red tools, £2 for small tool on the right.

    2012-06-25140120.jpg

     

    Lift up rear part (right as you look) first, then gently pry edges and it should pop up.

    2012-06-25140511.jpg

     

    Release clips that hold switches. I suppose you could just leave switches in cover and remove white connector only if you prefer.

    2012-06-25141025.jpg

     

    Push on small white square which is fairly central on side of block to release.(below blue wire )

    2012-06-25143629.jpg

     

    Undo two bolts, note they are different so replace them as they came out.

    2012-06-25141500.jpg

     

    Spring this cover off.

    2012-06-25141735.jpg

     

    There should be another bolt in there, mine was missing, also, you don't need to remove the grommet (doh)

    2012-06-25142253.jpg

     

    Release door clips around panel, I used "Y" shaped tool to leaver plastic clip from door.

    2012-06-25143036.jpg

     

    Showing more clips for FYI

    2012-06-25143052.jpg

     

    Lift panel up when all un-clipped and disconnect grey connector block, I had to lie on my back to see release tab

    2012-06-25143936.jpg

     

    Release door lock cable, pull white plastic part out of metal bracket and un-hook cable.

    2012-06-25144015.jpg

     

    Same again for second cable.

    2012-06-25144212.jpg

     

    Panel now removed.

    2012-06-25144407.jpg

     

    I think this is the window reset switch, was covered by sticky pad. As my windows weren't going up only to drop back down an inch or so I didn't touch this switch.

    2012-06-25144644.jpg

     

    There are two bolts like this that hold the glass, I drew around the washers of both so I could see how far and in which direction the glass had moved, I moved in about 3mm forward and 3mm up and that seems to have done the trick.

    2012-06-25145309.jpg

     

     

    Sorry no pics of final job, better but still not perfect, If I can work out about angling glass I will post some more pics.

    Cheers

    Mike

  2. Brilliant guide, thanks a million. I have been searches for ages for such a guide and you also explained a way to have a new HU installed but not lose the factory sat nav voice. It's unlikely I would attempt this install myself (but am tempted based on your thorough descriptions) but at least I can really appreciate what's involved and can now chat to an installer with a good background insight. You sir, are a gent. :#1:

    Cheers and thanks again.

    Mike

    :thumbs:

  3. Hello Spursmadave,

    Thanks for the very quick reply. :D The main prob with new head unit with built in nav is it costs two or three times the price of a non nav unit. Bit of a pain when i like the birds eye view presently installed. I will research again and look for wiring diagrams. I plan to get installation done proffesionally (don`t fancy the inevitable fire if I did it) so I'm not sure if i pro would cut into harnesses / solder new wires etc.

    All I really want is existing nav, great quality cd/mp3, and to get the people at Nissan / Bose who thought this stereo was good idea in room so I can poke knitting needles in their ears :bang:

    Kind regards.

    Mike

    :thumbs: d

  4. :welcome: lovies :lol::worthless:

    Hopefully this will work

     

     

    :welcome: to the forum

     

    use photobucket to host your pictures. You will find a guide on how to in the forum help. Its free to use photobucket and displays the picture here much better

     

    like this for instance

    IMAG0056.jpg

     

    Looks stunning, that will be your pride and joy then? Will read up on PB and try posting some better pics. Thanks for all the help.

    :D

     

    Right, PB account opened, notes on "how to read", lets see how this goes.

    2012-05-20153843.jpg

  5. :welcome: lovies :lol::worthless:

    Hopefully this will work

     

     

    :welcome: to the forum

     

    use photobucket to host your pictures. You will find a guide on how to in the forum help. Its free to use photobucket and displays the picture here much better

     

    like this for instance

    IMAG0056.jpg

     

    Looks stunning, that will be your pride and joy then? Will read up on PB and try posting some better pics. Thanks for all the help.

    :D

  6. :welcome:

     

    what pixel Size are the pictures, think it's 1280x1024 max for uploading, have you tried using photobucket ???

     

    Have just tried again using pc rather than android tablet, think it's worked this time, never used photobucket but will look into if this fails.

    :)

  7. :welcome: lovies :lol::worthless:

     

    Hello, tried to up load pic but failed, have tried again and get green bar up stating image is uploading but nothing happens. Then told image file is not suitable. I will keep trying, images are jpgs and the last one was 20kb so its prob just me being dim.

  8. Hello all,

    My wife and I have just purchased a 350z Roadster for a week end car. I wanted to post to say thanks to all the people here who have, and are, taking the time to run the site and to all those who post so much useful information.

    I now know that its not just my bose system that sounds terrible, that I probably need to do a window reset, which tyres to buy next etc. The list goes on regarding the insight you all have given me which means its easier to fix / sort things generally.

    All this adds up to a more pleasurable experience which is what we bought the car for.

    So thanks to you all.

    Cheers :D

    Mike

    Ps sorry about the username, the z has "LOV" in the number plate so the wife has named it "Lovie". You can't win them all..... :wacko:

×
×
  • Create New...