themoffshop

Hiya All, Updated spec list, what do you think... ? http://www.theprojectmoff.co.uk/SpecList.aspx

Drop me a PM if you need some help chap...

haha, yes, I did get some grief ... !!!

Sory for the delay, here is a write up, with in car video laps, and lot sof photos of hte day. Huge Thank you to Abbey Motorsport for the work on the car again In car lap . . Full write up here... http://www.theprojectmoff.co.uk/09-march-2014---silverstone-f1-circuit.5562310.cms?utm_source=Online_forums_project_moff&utm_medium=09_march_2014&utm_campaign=09_march_2014 . . .

During one of the laps on the recent track day, I snapped a tie rod. Was pretty scary in the car, sounded much noisier than on the video !!!

Cool, is he racing this year .. ?

Thanks Guys, will get the go pro vids up soon.. ! Coldel Do you mean Mike Cantello ?

Hiya All, I've done a little write up of the work carried out at Abbey Motorsport. Couple of videos of the car on the Dyno too... http://www.theprojectmoff.co.uk/2-march-2014---off-to-abbey-motorsport.5557732.cms?utm_source=Project%20Moff%20Update&utm_medium=02_march_2014&utm_term=Forum&utm_content=Update&utm_campaign=Project_moff_2_march_2014

We had a cracking day out at Silverstone on Sunday 9th March with Abbey Motorsport and their crew. Quite a few Abbey customers too. The weather was fantastic. Photos and videos to come...

Here is the Dyno run from Abbey Motorsport the other day. BHP figure is on the right middle (618 at the hubs) Lb/ft is on the left middle (divided by Diff Ratio which is 4.111:1, giving about 475 lb/ft) Its maxing out the injectors, so has been set back a little form this run Weather is looking like it might be dry, I can't wait for this Sunday !!!

This Sunday we are set to go to Silverstone F1 Circuit for the day, weather looks like there is a chance of rain, but fingers crossed... The Go Pro is charged, so lots of video and photos to come...

Hiya All, Sorry for a delay in updating.... The car is now back with Abbey Motorsport for a little bit of work. Dyno Run - Bit of a health check to make sure car is performing ok Suspension alignment - Abbey have a new hunter 4 wheel alignment and geometry set up tool which was recently installed. Service - Change all the fluids.... Few other bits... Keep you posted...

Been a little while since the last update. We are working on a few exciting plans to take place in early 2014... Will be sharing with all once its all confirmed..

We now have a nice new fuel break system fitted. Thanks to Abbey Motorsport for supplying the bits. Very simple way to drain fuel from the car. Full info here - http://www.theprojectmoff.co.uk/30-september-2013---fuel-break-kit-fitted.5517525.cms .

haha, feel free to write a big cheque to buy.. haha

Nice in car vid from snetterton 200... What do you think ?

Updated Spec List Engine RB26 Red painted engine (from an R32 GTR) Garret 4094R Turbo (Oil and Water Cooled) HKS F Con Pro Gold Ecu (version 3.2) Wossner Pistons PEC Rods ACL Race Bearings Stage 1 Abbey Motorsport modified Head HKS Camshaft 264 Duration - 10.0mm Lift - Inlet HKS Camshafts 272 Duration -10.2mm Lift - Exhaust. Balanced Crank, flywheel, front pulley Top Mount Manifold Denso 720cc injectors HKS Oil pump N1 Water Pump HKS Gaskets and seals HKS Triple plate clutch Greddy External wastegate Trust 100mm FMIC Mocal 34 Row Oil Cooler 50mm Japspeed Radiator Nismo Fuel Pump Splitfire Coil Packs Rips modified GTR sump, with diff removed, welded, extended and baffled Cold start system removed Cabin heating systems removed from engine Greddy Fuel Rail R34 GTR Engine Loom Greddy EGT Gauge Greddy Profec B Boost controller HKS Hard Pipe Kit K&N Super Huge 100mm intake Filter Air Con Removed Carbon Canistor Removed RB25DET Gearbox Vibratechnics Custom Race Engine Mounts Exhaust Japspeed Silenced De-Cat V-Band 80mm Turbo Elbow & Downpipe Japspeed spec 1 cat back exhaust Drivetrain Heavy Shockproof Gear Oil Silkolene Diff Oil Nismo Pro S 1.5 Way Rear Diff with extended cooling fins HKS Triple plate Clutch Suspension Cusco Front Strut Brace Cusco Rear Strut Brace Driftworks Rear Camber and Caster Arms Cusco Front Camber Arms Polished Stainless Hicas Lock Bar Driftworks Front Tie Rods Tein Track Rod Ends Tein Track Rods Poly Subframe Bushes Driftworks Rear Traction Arms Ohlin Coilovers (Rebuilt to full track spec) Exterior Full Respray (coming soon) Nismo Bodykit Custom front Splitter Carbon Nismo 'B' Pillars Custom made Carbon Kevlar bonnet Custom Carbon Kevlar wider front wings Carbon Rear Boot Carbon Rear adjustable Spolier Custom Sand Blasted, etched and powder Coated front and rear subframes Dual HID's 600k 55w. Main and Dipped Beam Interior Tinted Windows Corbeau Evolution Carbon Kevlar Drivers Seat Sparco Formula D Suede Steering Wheel Snap off Steering boss kit Extended steering boss Apexi Dual Turbo timer Greddy Profec B2 Boost Controller Stripped Interior HKS Boost Guage 2 x 3" 4 Point EJS Racing Harnesses Andy Robinson FIA Approved 7 point Roll Cage with Door Bars Greddy 60mm EGT Gauge Greddy 60mm Oil temp Guage Greddy 60mm Oil pressure Guage Stack Water Temp Gauge Carbon Door Cards Brakes Nismo Steel Brake lines Stoptech 355mm Front and Rear Discs with Aluminium Hubs Stoptech 6 Pot Front Calipers Stoptech 4 Pot Rear Calipers DS3000 Pads Custom Moff made brake stopper RBF600 Racing Brake Fluid Wheels & Tyres 18 x 11J Rota MXR Rear ET+8 18 x 10J Rota MXR Front ET+12 Toyo 888's 265/30/18 Rear Toyo 888's 265/35/18 Fronts Power At 1.4 Bar Turbo Boost pressure Peak Power 605 BHP @ 7816 Revs @ Hubs Peak Torque 445 lb/ft @ 6310 Revs @ Hubs

Ooooooh, Time Attack put us on their website...

Hiya All, I've now done a write up of the time Attack Event, where we came 3rd. Pretty ggod for our first time out competitively in 3 years. there is an on board video, write up, and lots of photos on the blog http://www.theprojectmoff.co.uk/9th-june-2013---time-attack-race-day---snetterton-200.5496200.cms Feel free to subscribe to thread

Great Pic from Rich Sams

Full Write up of the event, along with photos and videos coming very soon.. If you would like to follow the Facebook page for Project Moff, please do www.facebook.com/themoffshop

There is a quick vid on the Facebook page https://www.facebook.com/themoffshop

Well, what a day... We managed to end up in 3rd position in the final, and were also faster than the previous club record set in 2011... (guy in first place now holds it, as he was first, but just goes to show how quick the final was) Photos and more details to follow soon... Huge Thanks to Abbey Motorsport for their help...

Test day completed, it rained a lot !!! It was very Slippy, plenty of opposite lock.. Will dig the videos out soon. Some Photos Full write up andmore photos on the blog http://www.theprojectmoff.co.uk/24-may-2013---testing-at-snetterton.5490310.cms

Will do... Looking forward to scarying myself silly !!