ashyk36

Ive just been offered a centre console off a 2008 model as the centre console in my car is damaged. The problem is my car is 2004 model. With the 2008 plate being a facelift the centre console is slightly different (better) Will the centre console fit in my car with a little tinkering to the heated seats/hazard light wiring?

ah, I cant hear my motor at all so cant be the valve can it? Does anyone know where the fuse is for these pumps?

The power plug on the board is a little flimzy, but by the looks of it it should still connect it if i put a little pressure on it right? Electrics is the one thing i do not know much about so I may struggle

Thanks, its still not turning on, I will try it with a different power supply later....

They are really dirty, they really spoil the cars appearance, in the day they just look dirty and at night the light doesn't go through the lens well

Hmmmm, it has a round pin (12 power i think) powering it, it doesnt turn on though so i cant tell

nrv?

Is there a fuse for them so i can check them before i buy a new pump?

yes it is touch screen..here is the picture of the front

Sat nav has never worked since i got the car. Opened the dash up and this is the sat nav.. problem is i dont know if this is an aftermarket one or the original. Can any one help me?

did anyone manage to fix this problem? Neither my rear or front washers work,however the headlight ones do. I've opened the 3 fuse boxes and I cant seem to find a fuse for the pump? Anyone able to help?

With the next andoid update (ice cream sandwich), it may be possible that you do not need and physical buttons to operate the device, when this comes out next month would we be able to put this on. Also another way to of not needing physical buttons maybe to use meego? its still open source but again the OS does not need any physical buttons

Ive been searching over 2 hours now, the inside of my headlight lens are filthy. All the posts have talked about making the inside of the headlights black in which case they need to bake them and then paint them then put them back together.. My question is if i only want to clean the inside of the lens, is there another way of doing it, or is this the only way? If this is the only way how difficult is this task to perform? Thanks

Thanks :)

I just received my pair of led's? they do not plug straight in, is it ok to cut some plastic edges off the connector?