simon da silva

Allright cheers!

Tomb did you get my PM?

You got PM

its not a very easy task, so i would deffently have the car sent to a mechanic. You will need to remove the timing chain etc, to replace the cams. plus some other stuff from the engine. i belive the workshop manual has it set to 4-6 hour job for a mechanic..

Ok Dave, These items are the one to use if building an NA monster... Let me know what he says, and throw me an offer if interrested. I have another interrested buyer from Italy, so first one to say dibs get it

What do you mean Dave? with the 2 mods, plus some other mods like plenum spacer etc. you are looking at a gain around 60-80 hp i belive.. +/-.. something like 300-320 whp i belive, after a tune!

20-30hp estimated.. you dont need a tune to run these but its recommended to gain the full potential of the cams

Hello High quality Wiseco high compression pistons for NA build or Supercharger build... These pistons holds upwards of 800 HP so plenty of strenght in them. Pistons have got approx 2000km on them and they are in perfect condition. Piston Retail for £688 on tarmacsportz site. I'd like to have £300 for the pistons

SOLD SOLD SOLD!!! So guys. Since we've got a baby comming in the start of 2014, im not going to be able to do my planned NA engine build anyways, so im going to sell of some of the goodies i've got left over. First off is my slightly used Tomei Poncams. They have got around 2000km on them and i got them of a friend of mine who toke his 350z back to stock and sold it. These retails for around £1000 I'd like to get around £670 for these GET A SPECIAL DEAL! BUY THESE TOGETHER WITH MY Wiseco 11.1:1 forged piston kit + Eagle forged connecting rod GET EVERYTHING FOR £1000 Here is what Tomei is writing. Tomei 143064 Poncam 264-10.8mm G2 Camshafts 03-06 Nissan 350Z VQ35DE Tomei Poncam camshafts are designed as a "drop in application!", No dialling in required as the nock-pin has been pre-set so that the timing is set for you. Tomei Poncams are designed to work with the standard valve springs and offer the best drop in performance gain for both street and track use. These cams will work with the OEM ECU settings and aftermarket ECU if you want more customised settings. Features: Years: 03-06 Non Rev-Up Motors only Poncam VQ35DE Duration: 264; Lift: 10.8 Cams are in perfect condition, with no marks, scratches etc.

damm 2,5 bars.. must have been funny as long as it lasted

Airride is allready sold

LOWERED! Im moving so i need this gone!! £100 ! TAKE IT AWAY!

WIll this fit the Ati Procharger kit ?

i'll take it if the other guys doesen't buy it

damm i was afk so i dident get to make a higher bid.. Can we figure something out?

did it sell yet?

Hey Stevey. The outer a-pillar trim... http://i286.photobucket.com/albums/ll103/tony420z/IMG_0289_zpsbdb18d9b.jpg Both sides.. if the rubber is in good condition i'd like to buy em if you have a good price? Thank you

if this would only fit the 350z!!!

Bump!

Hope it sells mate - someone is getting a deal something tells me that ZedShed been to Denmark recently... :lol: wtf Vlad? Nope.. Is going to a pretty new forum member.. Deposit taken today!

pending sale! awaiting deposite

Thx buddy! Hope you will enjoy it

Do you ship exhaust? then i would like to buy it

i have a complete replica of the true dual HKS exhaust.. Would you be interrested in that? its done 2000 miles

Would you be interrested in taking a complete bolt on airride kit for the 350z in trade?