rodgeevans

So a few bits have been fitted, since last update, miltek exhaust is now on and the ultra racing mid brace. All the HR interior is now fitted including the coin drawer infront of the passenger, sent my steering wheel off for a full modification to look like this but with yellow accents and perforated sides

I have also stripped the spare power seats I had to get the heat pads out and I will be fitting these to my manual seats (don't like electric they too slow)

Forgot to add got at Nismo R-tune CAI to fit

The app I use is car gauge Pro, there is a free trial then you can pay for the full version, torque will not work with JDM some people say newer JDMs might not work with anything.

The app has all the live readings, fault codes, throttle learning, rpm adjustment etc. 

Yeah not far from Hadleigh, glad your on the way to getting it sorted, if not someone may have been close to come read the codes

I use this one on my JDM with Car gauge Pro

https://amzn.eu/d/5Hs5mgN

Where are you based?

Hello and welcome. Nice looking car he has there!

Hello and welcome

12 hours ago, Mike1989 said:

Love the Nismo dials, did you pick them up off a fellow member or brand new?

They were from a car ZMANALEX was breaking for a while, asked and he still had them

Yeah really hope you have some luck getting your money back and it wasn't too much. Some people really are a blemish on society. 

If I receive anything similar again I will be sure to post a warning message of potential scam for other users.

He msgd me but then deleted it claiming someone was selling a ChargeSpeed rear bumper I did some checks couldn't even find the user or post he was referring to checked his profile and gathered it was a scam

His msg before it was deleted looked like this

You must have missed the post of lewis09 about chargespeed rear bumper sale some days ago... I asked him about it and he said it's still available with him

It was deleted before I tried reading it

2 hours ago, pintopete58 said:

Hi I do have a 350 face-lift steering wheel complete and good condition but switch surrounds are blue but you can paint them to match gear surround 

Thanks, but not too different to mine, I did look at the flat bottomed one you had and had it not been for the blue... but I think its a flat bottomed one I'm after, or an aftermarket one

Also now fitted one of the door cards but ran out of time to do other side, JDM window switches retained to keep the auto down function on both windows

1 hour ago, davey_83 said:

Very nice love those dials. Will you be fitting the facelift door cards also? 

 

Also the newer interior came out for the facelift Rev Up model, so before the HR. Same as the headlamps and rear led lamps. 

 

Ah OK thanks didn't know that, and yes hopefully the door cards are going in today once I finish work

Small teaser picture of the HR interior going in. Going to spray the gear surround silver but it was orange and couldn't have that, but only had yellow to hand.

Going to have to get a fresher steering wheel now

Nice work there should look mint when your done

Set of face lift heater controls purchased intending to replace my pre face-lift controls but now got a whole face-lift interior will need the facelift control box to work on prelift

£25 delivered

Here we have a set of UK triple cluster and AC unit, this will replace the JDM bits and give you MPG, Mph and a clock great easy plug and play upgrade for JDM preface lift cars.

£60 delivered

Gone in a different direction now I have fitted the nismo dials set, so I have this up for sale. Normal RRP is £60. Tested and fully working as you can see from images although this was with a 9v battery so a bit dimmer than would be fitted but does have dimmer fitted in the kit. 

These will fit both 8k & 9k RPM cars as there is two rev dials. Never fitted.

£35 + £2pp

Nice looking zed, welcome to the club

All back together and working correctly, also with added new mats, gear shift and sil plates.

All ready now for my latest mid week purchase to arrive, hr centre console/dash and door cards and a deep clean of those carpets as well

So I believe this was due to my car being jdm and the dials being uk, so this morning have stripped them down to swap over the important bit.

Car gauge Pro works with JDM

So tried to do a little job today and fix the nismo dials whilst they look great, they don't seem to work correctly, has anyone experienced this before the dials get stuck and don't give a true reading then jump to another value in one quick movement without giving a true reading.

This was sitting at tick over which on my car is just below 1k however no matter the revs it didn't change until I gave it some beans driving and it jumped to around 4k, and the whole time I was either going 0 or 40mph according to the speedo

https://youtu.be/4gjyfFc4Bc8

I have had my import 12 years, parts are interchangeable if you dont get all the extras you want, I have also created guides on here for how to read codes and sensors etc. With the usual Bluetooth readers and an android app and also changing the triple gauge for a UK spec if it hasn't already been done, which adds clock and consumption in MPG rather than KML and as said before better rear bumper

There's this set on ebay could purchase and just swap the base or cover cover it's quite easy to do

Seat Ebay

Just arrived and on the wall, thanks Stu, looks great