Adam B

Want to pull steering rack out and replace all bushes, maybe new track rod ends depending on ££. Got new power steering fluid already.

I like the whiteline stuff, what do you recommend?

Thanks.

Same problem on mine as above, arm fell off but had to grind bush off of shaft in the end. Be aware.

Of course , I`ll paypal now.

Where should I send the money?

As far as I can tell they`re rear traction arms?

If they are I`ll take them bud. Paypal ok?.

Posted please.

I`ll PM details on your reply

Thanks

desperately needs a wash but I like these

Hello and welcome.

Don`t recognize reg. Was it a local car or did you travel to get it?

Bought and received front camber arms for my z. Very nice bit of kit for the money.

Does anyone have an assembly guide? Think I got it figured out but don`t want to f@#k anything up, grease or no grease etc

Posted on driftworks but no reply.

Any guidance much appreciated

Mines been sat in the garage since I took it off. Didn`t realize they`re worth so much!!!

Bodyshop should be able to supply hardware if they`re a competent outfit. Unless you need specialist components.

When mine was fitted the problem was opposite, bite point right on the floor. Adjustment of the pedal cured mine

Right, cheers.

Gotboost here in pyle are very good at mapping and building anything car related but unfortunately can`t do UPREV.

My Z has a japspeed k4 at the moment which is silly loud, the thought of siting on the motorway for three hours put me off

Ear plugs and a call to Horsham then. Cheers bud

If I can say no to the overtime I will be there

Hi all, I know this is meant to be a meets forum but my question relates to local knowledge.

Horsham always mapped my silvias. Lot of respect for Jez and his crew but can anyone recommend a good remapping company in south wales?

Thanks

Mountain Attack. 9am Sunday morning. Somewhere in South Wales

Need this kit also, oil plug holes full of oil.

like wise, drivers side only, side bolster torn. Free to collector

2005. Manual Cloth seat good airbags

God I wish I had £7000

GLWTS

Hi, just a few quick questions.

Can the steering rack bushes (all three) be replaced with the rack in place?

Gonna change the fluid also, anybody recommend good replacement track rod ends?

Thanks

I`m working my way through the bushes on mine.

I would pull that arm off, press out old bush and replace with uprated bush of choice. (Whiteline for me)

Looks like my compression arm bushes were.

Can`t find it either?

Lovely, clean example.

GLWS

It`s pretty easy once you get into it. Remove all pop clips you can see, a lot of the panels need careful prying/pulling off as the clips are hidden underneath. Clips are all available on ebay or Nissan in case you break any. Start by pulling up boot seal. Remove rear carpet, rear center section trim. etc

I`m running hawk pads, there is far less dust than oem but they are not dustless by any means. Just so your aware

clutch kit I`m currently running:

http://www.350z-uk.c...nc-smf-350z-de/

got my kit from tarmac, "motordyne plenum spacer fitting kit". Bolts, washers and spacers for inlet and strut bar.

Nights for me also.

Just ordered one now. Thanks for the discount and the guide, Win Win