350zpete

Hi mate will these suit a set of Rays?? Are all the fittings/fixings with them? Cheers Pete

Ill keep this in mind mike Ill see how the megs go as ordered now

On recommendation from the boys here on the Megs Endurance ive found this to be the best price. There is cheaper but they dont have it in stock http://cgi.ebay.co.uk/Meguiars-Endurance-High-Gloss-Wheel-Tyre-Gel-Shine-BN-/400131513276?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d29b25bbc

Cheers lads Im going to try the megs I am currently using megs but it is different than the one in the link provided! Getting this ASAP as wheels are going for a refurb at the end of the week

Hi Guys Im still unhappy with my tyre walls ive tried countless brands now! Im looking for a high wet gloss finish on them. I thought i came close but the problem was dirt/dust just stuck to it. What do you boys use??

£120 my dealer was gonna charge to supply and fit the plugs last week when it was in for the 54k service Going to buy the plugs and fit them myself

Low miles are nice to have and will be easier to sell in the future BUT...... as the boys say a service history with it and you shouldnt have any issues

Think i would be running a check on this one you only get what you pay for as the old saying goes, seems a little to cheap!!

Go for a proper one and get the coupe not a roadster

Wheel bearing fitted My Zed is like a new car

Good stuff that will be fitted tonight or tomorrow night Just hoping im rite in saying that it is the passanger one!! Any easy ways in telling?

Will i need any special tools to remove/replace this or do the 4 bolts just hold it in place? Ive just bought it of zmanalex so its ready to fit! Cheers

Got it sorted! Thanks to zmanalex once again! It turned out that there may have been something trapped behind the brake disc when i had it off!! I took it off and re installed it and its all working fine! Cheers lads! Pete

HI Guys ive got the problem of the knocking now sorted! I went round and tightened all the nuts etc up again and there was slight moement in the rear nut! Now this is cured ive now another problem!!! There is now vibration coming throught the steering wheel and the steering doesnt feel as solid as it used to!! The problem has onlt happened since i changed the banana bar! HELP!

Hi guys i have now replaced both drop links and the passanger side banana bar and the knocking and banging is still there Anymore ideas?? Im cracking up now!!!

Anyone had any problems with this? I rang my local dealer and he quoted £200 for the bearing fitted and another £317 if the flange has gone aswell. Is it normal for the flange to go aswell?

That aint good news boys Although i am getting a 56000 mile P2 service for £180 of my local Nissan Dealer And thats including brake fluid!!! Going to replace the Plugs myself as they were ging to be a further £120 fitted!

Really confused now after doing some research!! Do i have to replace the whole arm or are there after market bushes/ball joint i can replace these with???

After looking i think the problem is the lower suspension arm Do i have to replace the whole arm or can i just get the bushes? Cheers lads you have been a great help so far, keep up the good work!!

Hi Guys There was alot of knocking and banging coming from the underside of the car (at low speed) so i had a look and found out that the drop links were knackered. Now i have replaced them and it has helped the problem but the knocking is still there (at low speed) I have had another look but everything else is still intact! Any ideas??? Cheers

Hi mate Find out how much P&P is for these to ship to Northern Ireland? Ive had a few sets shipped to me for various cars now and it hasnt been to expensive

I seen the same as kudos is doing except in a silver finish for £105 on ebay!!!! Is that a good price?

Hi Guys After a set of 20mm or 25mm spacers for my set of Rays? Opinions would be great on which is best!

hi guys! Ive managed to get one sorted. £35 delivered with a 3 month warranty, thought that was pretty reasonable!!

hi guys, Im looking the front passanger side door moulding (The black rubber strip on the top of the door which is on the outside). Can anyone help? If so drop me a line with the price. Hope to hear from you Pete