1CE

NISMO Shifter SOLD! To the man above .

Due to the fact that my 350z DE is going to a new home tomorrow. I have the following sitting around with no use to myself.

Carbon Fibre NISMO shif ter - SOLD

Clutch slave cylinder , HEL braided clutch line & fluid (DE) - £50

HR headlights too is a bonus!

Strange one. This miust have started around or just after the same time my 06 de started miss firing. so I changed the coil pack on plug '1' and all was fine! But now it's heavily overfueling/runnning rich and every now and then when blipping the throttle I have a puff of white smoke that stinks to high heavens of fuel! I'm guessing this is unburnt fuel? Could the injectors be sticking open? 

That building is mainly occupied by the NHS, must be all the steam they are letting off  .

Just to prove my  Z does leave the driveway  .

Pm sent regarding intake

PM'ed 

I still haven't done mine. Everytim I try and take the nut off it feels like the rear end is going to pull off  ! So I chicken out.

Haha  .

I only wanted to do my droplinks. Now i've got arb bushes and a new w brace to work on. Wish I never looked under the car now lol.

Sorry this is now sold.

2 minutes ago, ZMANALEX said:

Is there not a hex socket within the stud to which you will insert an allen key?

Ahhh I didn't hink of that! That'll teach me to work on the car when i'm not well  .

Thanks mate!

This may seem like a silly question but how do I tighten the nut on the links without the bolts turning? Am I missing something or do they have no nut to lock it in place.

Mine are the same as this 

Just followed a pretty amazing purple 350z going through Basildon. Very nicely done .

Soooo I finally changed the diff oil last week (First diff service at 70k) . Not sure if this is good or bad but the magnet is doing its job  .

Nice job! How hard was it to replace the bananas? 

Excellent, thanks ZMANALEX !

Evening,

Can anyone tell me if you need to replace the washers on the fill and drain plugs of the diff and gearbox when swapping out the oil?

Cheers  ,

Ben

Haha, my neighbours are always popping out to see what I'm up too  .

Done a few little tasks today that have been bugging me for a while! Sorted the rear bumper rattle...It was missing it's clips that hold it to the bracket, cheap easy fix! Also adjusted the handbrake, polished the headlights again..And polished the exhaust! 

No wasting time.. The Das Pro came out!

Autosol to the rescue! Pleased with the results!

Before

After

So being the crazy that I is, I decided to clean the old girl whilst it was hailing yesterday  . Nice and moody!

I do! haha, thanks for this  .

I have 15mm spacers on the rear, no cutting needed

Sorry I'm not posting due to the size and how fragile it can be.

Yeah still for sale  . Please note this is not a replica. There is also a slight storage mark about a centimeter long that should polish out.