Viper

I may sell my 07 Azure Blue soon, currently sitting around 30K miles, its in great condition and stock

the ramps are £2200 installed (they have to aligned, bolted down and wired up by the company) and lift about 1 metre, they do a set that go's to 1.7 metres but then you had to crouch underneath and you need a tall garage. Supplied 6"x6"x1" square rubber blocks on the jacking points were used the concrete has been cut and the ramps are flush with the floor so you can just drive over them without knowing they are there. His garage isnt quite complete as there are ceramic tiles to be laid my mate has a discount card for vauxhall, same spec oil go's in the VXR's, so 5 litres which they sell for £48 was £17, bargain

cant wait maybe next time, as im popping to my mates and using his recently installed ramps

nice one thanks !

whats recommended for a 2007 ? was gonna try and pick some up on the way home (tried the search feature nothing jumped out at me)

the nurse is Nadine a good friend of mine who i met through the viper club, youll see her all over google with her viper she still has her GTS and does lots of track stuff with it, she brought it aged 23 the bit about 'probably' striking you couldnt of got it more wrong, Nadine still works long night shift hours and volunteers for any extra hours to fund hers cars and track habit

my excuse is im a bit country'fied so the surrounding roads get real mucky after the slightest bit of drizzle, Z tax run out in nov and i got the use of another couple of motors. So polished up under the car cover and on with the Optimate, tucked up against the heater for a few months...

i just sorned for the first time since i started driving, and ive been given a months hol and the sun is out, though its a little nippy

will do thanks !

no, only got the car back on thursday night after the new flywheel was fitted forgot to mention there is another noise when in neutral you can here a faint grinding noise, that come and go's once when clutch is depressed/released

OK thanks, '07 GT manual on 26K miles, the noise is there on start up every time and goes after a few miles. Would have to check but im sure it doesnt do it once warm. No other issues with it

anyone in the West mids have any knowledge of the Z gearbox ? mine has developed an annoying 'machine gun' noise which disappears after a few miles ive just swapped the clutch and flywheel thinking that was the problem but it wasnt..

i know nothing about the system but am not surprised that plugging a laptop in doesnt work have you tried putting your music onto a USB memory stick and using that to transfer it over?

for old times then old clutch at 26K miles / new Exedy clutch

great service from zedworld, i received the old parts and pics of the work being carried

ive used the other place next door to for my other cars in the past for a few years good service there as well. i was brought up in Coleshill just a few mins walk from these garages before escaping to Kingsbury (just had the call and my Z is ready for collection)

after chatting to the owner this morning, zedworld have other 350Z customers having the clutch replaced with parts supplied by ZMANALEX

im dropping my Z off for the first time tomorrow at Zedworld in Coleshill, not 350 specialists but they are more than happy to work on my car, ill let you know how i get on. There's been a 10 day wait to get in, so hopefully thats a good sign http://www.zedworld.co.uk

i can make one for you, any size you like. Ive ran several sticky plates for years on other cars and have never had a problem, though the less friendly MOT places may ask you to put the correct plate on.

Squee ~ i printed these on a small thermal printer (gerber edge from Spandex) which is hooked up to a Summa plotter i have at home, rather than the usual solvent printer. They will stand up to outdoor usage without laminating over them, its ideally suited for smaller runs of small decals. Though i have the use of a Nur 3000mm banner printer, Vutek UV printer and a Zund at work, which will print onto and then profile cut just about anything flat or on a roll upto 2000mm wide and 50mm thick. There's a couple of 1600mm wide HP solvents which are defunked as everything go's through the Vutek ianphampton ~ pm your details and ill post it tomorrow

took a pic of the logo on my car then printed a few Z logos onto self adhesive vinyl for the back of my metal tax disc holder i have x4 at 42mm diameter and x2 at 75mm diameter going spare, so if anyone wants one drop your username and the one you want below and ill post them out, first come first served mods ~ if this isnt allowed please delete my post, cheers

bump... still looking

http://www.moving-parts.com/ i havent used these guys myself, but know a few who have and its been a hassle free service

had to buy a new DVD writer as my old one wouldnt burn dual layer DVD's, copied it tonight, though i havent tried out on the road will see tomorrow if it really worked...