Clipz_Demon Posted June 5, 2015 Posted June 5, 2015 Master cylinder DIY: http://my350z.com/fo...r-cylinder.html Slave cylinder and clutch line DIY: http://www.frsport.c...-350Z_t_95.html Thanks for the guide, though unfortunately borrowed a car lift to help with this upon seeing where the fluid was leaking from, realised that is was inside the bell housing. Which meant talking to mechanic friend stood there that we needed to drop the transmission to investigate inside the clutch housing. Low and behold the clutch is *********** covered in fluid as well. Means new complete clutch and everything while we were there after dropping the transmission might as well do everything save labour costs again. I now have no free time as work has pulled me in for like 3 straight weeks so no time to fix. Means garage and labour charges now as well as new clutch. update: Removed the clutch that is barley a year old, its a stage 2 competition clutch with a lightweight single mass flywheel installed. upon looking the clutch had burned right down to the rivets!!! I mean this is silly as the car has only had 2 track days and barley any laps at that. Plus normal driving about 15miles a day. so to burn a clutch in that time something must be wrong with installation to make it burn like that. I mean i don't drive it hard or ride the clutch?? So now i need a complete kit any suggestions? I am looking at a OEM replacement as realised I have no use for a performance clutch if just normal driving will kill it that fast. Quote
Clipz_Demon Posted June 5, 2015 Posted June 5, 2015 i have a 57 HR facelift model, seems online the clutch is not as easy to find as the pre-facelift models. I also require the cylindric cylinder, clutch plate and cover. any suggestions? Quote
Adrian@TORQEN Posted June 11, 2015 Author Posted June 11, 2015 Clipz, hope you're sorting a replacement for your clutch with the manufacturer / trader to avoid wasting money on a new clutch kit as discussed, let me know how it goes. Quote
Clipz_Demon Posted June 12, 2015 Posted June 12, 2015 Yea waiting for a call from boss as sent some pics in of the clutch as per there request so see what they say next step probably send it to them but then I still don't have a car. Getting fed up of being driven by the Mrs lol. Quote
Clipz_Demon Posted June 12, 2015 Posted June 12, 2015 Yea waiting for a call from boss as sent some pics in of the clutch as per there request so see what they say next step probably send it to them but then I still don't have a car. Getting fed up of being driven by the Mrs lol. Quote
Clipz_Demon Posted June 15, 2015 Posted June 15, 2015 http://www.clarkmotorsport.co.uk/parts/Clutch-Kit-Stage-2/2-piece/6073-2100 Not going against seller they have done some good deals for me so good seller. Bad part, I would avoid this clutch as what I had installed in my car not great quality as only lasted 3000miles barly a year and was never tracked or ragged hard. So maybe not his solution. I have been trying to get some help from manufacture to get sorted but they are sooooo slow in responding as try several times a day and getting fed up. Had to get new clutch as couldn't be without a car for any longer. I managed (sorry Torqen) to get Nissan parts at a massive reduction compared to Nissan them selves so that has now been installed. But yea still fighting to get money or even replacement which will be spare or sold on eBay. Lol Quote
Adrian@TORQEN Posted June 17, 2015 Author Posted June 17, 2015 Not sure it was the clutch, perhaps how it was fitted? How can it last only 3000 miles on a NA car, unheard off. Happy to hear you sorted out your car, hopefully the seller or the manufacturer will help you recover cost for the old clutch. Quote
nrc Posted July 12, 2015 Posted July 12, 2015 Hi,going to need a clutch soon for my 2009 350Z HR,I would like to keep it as standard as possible.I want it to be as quiet as possible and it will not be driven hard very often.I also want to keep the cost as low as possible,bearing in mind I assume the flywheel will be changed also. what do you advise? Quote
Adrian@TORQEN Posted July 19, 2015 Author Posted July 19, 2015 Hello buddy, I'm sorry I've missed this post! Any of the Stage 1 Clutches should do and paired with a Single Mass flywheel for a bit more punch. Have a look at the main post on this thread. PM me if you still need more info. Adrian Quote
Adrian@TORQEN Posted August 4, 2015 Author Posted August 4, 2015 Great value clutch kits and combo options, ask away if you're not sure what Stage or ancillaries to go for. 1 Quote
Adrian@TORQEN Posted November 10, 2015 Author Posted November 10, 2015 All clutch packages have a further 10% discount until the end of November 2015, contact me for a cracking deal if you need a clutch soon and mention about this discount! Quote
Adrian@TORQEN Posted September 13, 2016 Author Posted September 13, 2016 First post update with more useful information, links to each product and also to our most popular combo packs - complete clutch solutions for both 350z DE and HR. Next update will be once we've finalised the TORQEN master cylinder upgrades, should be next week. These will be available for immediate shipment. Any further questions please feel free to post here or PM me. Quote
Welsh31 Posted April 1, 2017 Posted April 1, 2017 Why do you have to pay by Bank transfer stead of straight through the website Quote
Adrian@TORQEN Posted April 1, 2017 Author Posted April 1, 2017 (edited) Why do you have to pay by Bank transfer stead of straight through the website You have 3 options: 1. Worldpay - Credit / Debit card 2. Bank transfer 3. PayPal - account & Credit / Debit card We're working to implement 2 more options: 4. ApplePay 5. Finance Edited April 1, 2017 by Adrian@TORQEN Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.