stveclrk Posted July 23, 2014 Posted July 23, 2014 This is an Invidia Gemini true dual cat back exhaust. 60mm pipes. Stainless steel. It came off a V35 Skyline with a VQ35DE engine so it is approximately 200mm longer than a 350Z exhaust system. It has 5000 miles on it. I'm located in Suffolk and its pick up only unless buyer pays shipping. Gaskets and hardware included. £650
Kerry Posted August 2, 2014 Posted August 2, 2014 How does the exhaust being 200mm longer effect the fitment when it's on a 350z?
stveclrk Posted August 3, 2014 Author Posted August 3, 2014 It will fit to every bolt and hanger but the mid pipe needs to be cut and re-welded to fit a 350z. Both cars had the same style exhaust mounts and flanges and with a non-true dual exhaust you can just buy an adapter pipe to fit between the Y-pipe and mid pipe in order to compensate for this length change but as far as I know, there is not an interchangeable part for a true dual exhaust for the G35/350GT and the 350Z.
stveclrk Posted August 3, 2014 Author Posted August 3, 2014 If I where going to do this project on my own I would cut the "H" pipe and re-weld it. It shouldn't cost a lot seeing that stainless steel isn't very difficult to TIG weld compared to aluminum or titanium. You could probably get away with MIG welding it too.
Piranha Posted November 19, 2014 Posted November 19, 2014 Here' s a youtube link to what these sound like on the car
T-Bear Posted March 11, 2015 Posted March 11, 2015 Hi, Is this still for sale? Can collect any day of the week based in mid Essex.
GIXXERUK Posted March 11, 2015 Posted March 11, 2015 Last Active Sep 28 2014 20:29 I'm locking this as sold as it's causing confusion Can the Op pm me if he wants it opening .........will also pm the seller
Recommended Posts