Help with sorting error codes

[Cookiebear]

I've had 4 warning lights come on on the dash since just before Christmas. Finally got a chance to get it diagnosed yesterday and was given a list of the following error codes;

 

P1805 Brake switch improper signal

P0345 Camshaft position sensor problem bank 2

 

ABS

C1142 ABS Pressure sensor circuit

 

C1109 Battery voltage out of range

 

 

Hoping someone else might have had something similar and got it fixed.

 

I was thinking of replacing the brake switch and Camshaft sensor as well as a new battery. See what this does and take it from there.

 

All suggestions welcome to solve these issue.

[ZMANALEX]

I am asumming that your car is running okay ????

 

If so, keep a note of the codes and then clear them as some of them may be archived codes.

 

If EMS comes back on, then pull the codes again and post back up here and I will advise further.

 

Alex.

[Cookiebear]

Yes car still running without a problem, the engine management light was reset and hasn't come back on but the ABS, VDC and SLIP still come on when pushing the brake pedal. So think the Brake switch needs replaced.

[ZMANALEX]

Could be a few things:

 

Brake fluid slightly low.

Brake switch

ABS pump switch

Wiring at brake lights

 

Just to name a few.

 

Alex.

[Cookiebear]

Cheers Alex, I'll keep an eye on things and see if I can sort out the brake issue. Would you have a recommendation of somewhere to pick up a brake switch perchance?

[ZMANALEX]

I have all this stuff in stock, but before you start splashing the cash, best to top up your brake fluid to the max mark with the filter removed.

 

Alex.

[Cookiebear]

Ye checked the level as soon as the lights came on and was low so topped it up but not with the filter out. I'll give it a look in the morning.