Daryl Posted September 12, 2013 Posted September 12, 2013 Cant seem to be able to remove the passener airbag cover to get to a really annoying rattle. The service manual isnt much help. Iv got the lower part of the trim off, but cant get the actual upper half off. Do i need to remove the airbag? This is what iv currently got. Cant anyone help before i start ripping pieces of trim please. Quote
ZMANALEX Posted September 12, 2013 Posted September 12, 2013 Yes, remove the 1 x nut/bolt holding the air bag in place and then disconnect the loom. Alex Quote
Daryl Posted September 12, 2013 Author Posted September 12, 2013 Is that the one just covered by the loom in the first photo? 12mm or something? Quote
ZMANALEX Posted September 12, 2013 Posted September 12, 2013 Yes, the bolt in the center of the bracket. Alex. Quote
Daryl Posted September 12, 2013 Author Posted September 12, 2013 Ok cheers,will have a stab at that tomorrow morning Quote
Daryl Posted September 12, 2013 Author Posted September 12, 2013 Is it just that bolt that is holding the cover in place, or are there other screws that you need to get to to get the cover off? Quote
ZMANALEX Posted September 12, 2013 Posted September 12, 2013 There are 3 x self tappers along the lower edge which I asumed you had removed. It is virtually a 30 second job to remove the L/H cover and airbag. Alex. Quote
Daryl Posted September 12, 2013 Author Posted September 12, 2013 Ok cool, thanks Alex, will have a another go tomorrow, cheers. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.