rabster Posted December 15, 2011 Share Posted December 15, 2011 Hey everyone Does anyone know what size the Towing eye thread is for example M10 M12 M14 etc Cheers Andrew Quote Link to comment Share on other sites More sharing options...
Chris`I Posted December 15, 2011 Share Posted December 15, 2011 Can of worms this one. Cant remeber the sizes, but there are at least 2 different sizes on the Zed. Quote Link to comment Share on other sites More sharing options...
Zugara Posted December 15, 2011 Share Posted December 15, 2011 Measure the diameter of the bolt, that will give you your answer 20mm Diameter = M20 etc etc Quote Link to comment Share on other sites More sharing options...
rabster Posted December 15, 2011 Author Share Posted December 15, 2011 i would but the car is about 100 miles away so was hoping to get the details if there are 2 sizes if i have both sizes of rod at work ill take both home lol Quote Link to comment Share on other sites More sharing options...
Chris`I Posted December 15, 2011 Share Posted December 15, 2011 There was a group buy thread where I think both were listed. Lets see if we can find it... Ah here we go - http://www.350z-uk.com/forum/viewtopic.php?f=33&t=32418 Quote Link to comment Share on other sites More sharing options...
rabster Posted December 15, 2011 Author Share Posted December 15, 2011 That's great looks like mine is a 22mm Next question is the mounting point just a thread tapped into the steel or is it a hole with the thread tapped into it again as in a straight through hole if I had the car I could look this up it's real pain not having the car lol Quote Link to comment Share on other sites More sharing options...
rabster Posted December 16, 2011 Author Share Posted December 16, 2011 ok so i found this link on the forum which shows the towing eye on the crash bar viewtopic.php?f=35&t=19516&start=0 It looks and im sure someone can confirm that its just a tapped hole on a bracket welded to the crash bar, this is good news as i can run a bit of stud through the tow eye and nut it both side which will give me the basis for some extra bracket work Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.