Karlp Posted July 31, 2011 Posted July 31, 2011 does this look correct guys??? Back of ken wood ddx5022 Rest of loom to go into car Quote
BulletMagnet Posted July 31, 2011 Posted July 31, 2011 Providing you have ordered the correct loom then it should be fairly straight forward. Quote
Karlp Posted July 31, 2011 Author Posted July 31, 2011 Yep from ict thanks to the guide on here Quote
Karlp Posted July 31, 2011 Author Posted July 31, 2011 No power to head unit guys seem to have everything connected up Quote
Karlp Posted July 31, 2011 Author Posted July 31, 2011 Okay all on but no sound??? I have put the 2 phonos red and White in the front L R of the head unit is this correct? Quote
Karlp Posted July 31, 2011 Author Posted July 31, 2011 I have a spare blue/White and black wire coming out of the ict loom do I need to do anything with it? Quote
Karlp Posted July 31, 2011 Author Posted July 31, 2011 Done it was the amp wires needed splicing together, sound is very low I need it on around 26 max is 35 to hear anything do I need something else? Quote
BulletMagnet Posted July 31, 2011 Posted July 31, 2011 You may need in-line volume boosters, ICT make them too, I put two boosters in mine, one for front and one for rear speakers Quote
spursmaddave Posted July 31, 2011 Posted July 31, 2011 This is what I used, think its the same as the ones BM used too Link - http://www.sextonsdirect.co.uk/autoleads/p~PC9-460.html?cat=0 Quote
Karlp Posted July 31, 2011 Author Posted July 31, 2011 Thanks dude. Out of interest where's does anyone put there USB/iPod lead coming out of the back of a head unit? Where's the best place to have it coming through the dash? Quote
BulletMagnet Posted July 31, 2011 Posted July 31, 2011 If long enough, you could route it to the cubby between the seats Quote
spursmaddave Posted July 31, 2011 Posted July 31, 2011 Not long enough dude Pioneer one reaches nicely Cant you get an extension? If not just route it to the centre cubby unless you have a satnav... Quote
spursmaddave Posted July 31, 2011 Posted July 31, 2011 Got a jap satnav lol Then my friend you should have got a Pioneer Quote
Karlp Posted August 1, 2011 Author Posted August 1, 2011 I only seem to be getting sound from my front speakers, my head unit has phono plugs for front LR rear LR +SW and AV LR, I only have 2 L R plugs from the ICT lead and I've put them into the front L R? I've purchased the line amplifier from sextons, will this make any difference? Quote
spursmaddave Posted August 1, 2011 Posted August 1, 2011 Is anything coming out of the SW? Check the settings on the unit it might be set to front only + SW... Quote
Karlp Posted August 1, 2011 Author Posted August 1, 2011 Nothing coming out of the sub or the other little rear speaker? Quote
BulletMagnet Posted August 1, 2011 Posted August 1, 2011 Double check that everything has been connected correctly to the OEM harness. Preferably you should have four phono leads connected, one for each speaker. Quote
Karlp Posted August 1, 2011 Author Posted August 1, 2011 Yeh I only have 2 from the ICT lead from sextons, there are another 2 yellow and black but thats for AV Quote
BulletMagnet Posted August 1, 2011 Posted August 1, 2011 Maybe it's different for Kenwood units. Surely someone on here has a Kenwood unit installed that can give handy hints Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.