passanger door card removal

[jmk]

hey could someone give me a detailed explaination on how to remove the passanger door car from my Z the motors gone looking to change it.... thanks people

[The Hoff]

1) Pop out the black trim behind the door opener, undo the screw behind that.

2) Pop off the silver trim (very carefully) on the door handle using a screwdriver or the like at the bottom and gently prise it out. Undo both screws you can now access at the top and bottom. Remove door handle.

3) Remove the elec window switch/arm rest trim, it just pops off by lifting up the back first. Disconnect the plug and remove the new screw you can now see.

4) Pull the door card from the door starting at the bottom left, its take some pulling pull will pop off bit by bit. Be carefull at the top right by the tweeter grill, you need to tilt the door up at the back to allow it to move out easily.

5) Job done.

[spursmaddave]

http://www.350z-tech.com/zwiki/Tutorial:Front_Speaker_Installation

 

There you go, strangely it was the first hit when I put '350z door card removal' into Google

[jmk]

thanks guys for your quick response must tackle it l8r...

[HaydnH]

There you go, strangely it was the first hit when I put '350z door card removal' into Google

 

And you didn't use a "Let me Google that for you" link?? Was that so hard?

[doctor austin]

Just done mine this evening took an hour .. the motor just needed the commutator cleaning..works brill now