Varrstoen - We are UK dealers...

[ryan21]

22s if you want fat tyres are the easiest option.

 

If you dont mind sticking with 225 or 235 front and 255/265 rear I'd think the 12s should be fine.

 

It will depend on how low you are and what camber you are running of course...

 

Sorry for the all questions, just want to make sure i get the right wheels

 

From looking at other threads most people seem to have 235 front and 275 rear on the 19inch rotas. Would 265 look ok on a 10" rear wheel?

 

Also is there any photos showing the difference between +22 and +12 on a 350z? I´ve found pictures of et0 offset but not the others.

 

If i did go for the +22 is the 3mm spacers something you can supply?

[ben@RARE RIMS]

Spacers are on the shelf and no problem

 

I have just placed an order for a selection of wheels, we'll see how they go as people buy them we'll get our own photos so we can be sure!

 

245/35 and 275/35 is the size most have had, not 235/275

 

265s are fine on a 10, it's the correct size for the tyre. They will fit on a few sizes, but it's certainly not a stretch or bulge.

 

At the moment just a little imagination I think is the way forwards with the different offsets. They're measured in mm, so 12 offset puts the wheel 12mm further into the car than 0 offset

[ChrisUUC]

Final question for me ...

 

What sizes would you recomend for the following specifics:

 

- Must clear Brembos

- Cars lowered on Eibach Pro Kit

- Must Not require arch work

 

Tyre Sizes:

 

- Low Profile

- With stretch as seen on Urban4's Volks

 

 

Many thanks, Chris

[ben@RARE RIMS]

With that camber, I would say the ET12s all round would be a good shout

[ChrisUUC]

Can you do the polished lip with silver centres easily enough?

[ben@RARE RIMS]

I can get them done, obviously there will be an additional charge over and above the black that are en-route at present.

[ChrisUUC]

How much all in buddy?

[ben@RARE RIMS]

The cost would be £1485 for the wheels, with powder coating silver.

 

This is all one colour, rather than with polished lip.

 

We are making enquiries into polishing the lip

 

J

[ChrisUUC]

Any ideas on the cost for the polished lips and silver centres dude?

 

Thanks, Chris

[ben@RARE RIMS]

We have not heard back about the polishing of lips yet

 

On the plus side...

 

[ChrisUUC]

OMG!!!!!! Is that Urban4's motor? That is awesome exactly how a Gunmetal should look.

 

Im thinking now I might go all Hyper Silver instead of polished on lips ... What you think? Could you PM me a price for just wheels like that posted to me and also a price for the same only with the same tyre sizes are in the photo above.

 

As for Urbans motors what sizes and offsets did he go for along with tyre sizes? Was any arch work required?

 

Thanks, Chris

[ben@RARE RIMS]

That's the one

 

Those tyres on there are a slightly mixed bag of Falken and Yokohama, I'll grab you some prices on tyres.

 

Price is the same - £1485 for the wheels, the choice of colour doesn't make much difference.

[Darren_Z]

Do you have any pics of these wheels fitted to a Z with an offset of +0 and dropped on Eibach pro's?

[Darren_Z]

Do you have any pics of these wheels fitted to a Z with an offset of +0 and dropped on Eibach pro's?

 

Any update on this? I have cash waiting to purchase these wheels.

 

I'm aware that I may require some arch work but need to know if an offset of +0 will actually fit with my drop (eibachs are approx 30mm)

[ben@RARE RIMS]

The silver car further up the page is the nearest we have.

 

That's the only set in the UK so far.

 

Those are ET12 all round, ET0 would be a little further out, 12mm in fact. That's the best I can do really

[ben@RARE RIMS]

OMG!!!!!! Is that Urban4's motor? That is awesome exactly how a Gunmetal should look.

 

Im thinking now I might go all Hyper Silver instead of polished on lips ... What you think? Could you PM me a price for just wheels like that posted to me and also a price for the same only with the same tyre sizes are in the photo above.

 

As for Urbans motors what sizes and offsets did he go for along with tyre sizes? Was any arch work required?

 

Thanks, Chris

 

We can now do polished lips, in a colour of your choice centres, £65 + VAT per wheel for an excellent job

[ChrisUUC]

Awesome ... whats the price all in then for the wheels?

 

Ive had a chat with Urban4 and he has advised the below for me to avoid arch work ...

 

9.5x19" ET12 235/35/19 Front

10.5x19" ET12 255/35/19 Rear

 

How much also for the above wheels and tyres delivered?

 

Thanks, Chris

[ben@RARE RIMS]

YHPM

[ben@RARE RIMS]

Just to confirm we have a full quota of ET12 and ET22 in both the 2.2 and 3.3 designs

[ChrisUUC]

Meant to ask what are the centre caps like for these wheels?

[ben@RARE RIMS]

Centre caps are just flat caps, nothing overly special, but functional and finish the wheel off nicely

[ChrisUUC]

Thats good ... Im very excited now. Will have my deposit down asap!

[Gibby]

Hi, could you pm me a price for the

 

19" by 10.5

19" by 9.5

 

Et 12 all-round with slight stretched tyres pls!

 

Thanks

[ben@RARE RIMS]

Hi there Gibby

 

Sorry for the tardy response first of all

 

YHPM

[ChrisUUC]

Just a quick question the Varrstoens look exactly like these TE37's in terms of concave to the wheels and dish size?

 

 

Thanks, Chris