Jump to content

Good noise bad noise


Recommended Posts

Posted

Ok, so my JWT PC was installed by my myself and the man mavis, sounds great with the Kinetix Cats. My problem is now something is vibrating when I go over 5000 revs ( which is more often than not). Its coming from the boot, quite annoying, not my axle's clicking as they are being done on monday, it's a real high pitched buzzing vibration, and no I haven't been shopping at Ann summers

Posted
Nice one Liam, I think thats the burstard, have you any Blue Peter hints how to stop it :thumbs:

 

Undo the 2 retaining lugs either side, it comes straight off.

 

Take it for a spin and make sure it's that first...

 

Not sure off a cure, let me know if you find one ;)

Guest prescience
Posted

I would say there are 4 possibilities for this noise

 

1. As mentioned above and you try fixing by applying a small amount of grease to the locating lugs

 

2. The top of the rear strut brace. Remove all the trim (pull sensibly but firmly to remove), and you will a satin liner underneath, lift that up and you should see a locating lug in the centre - cut it off, it serves no purpose

 

3. The top of the rear strut brace. Remove all the trim (pull sensibly but firmly to remove), pack in some additional felt, or wadding and replace

 

4. The manual boot release just below the rear strut brace, you'll just need to see why this is buzzing (if it is) and adjust

Posted

Problem sorted I hope, I took the silver fitting off of the rear strut brace, and pulled out the filling, took out the node thingy and packed it with felt. It seems to have gone, so cheers for the advice. :thumbs:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...