HELP EIBACH SPACERS!!!

[witstu]

Bought the jinxed eibach spacers off Danny350z today.Set too on fitment of them on one of the front wheels first.They are the system 6 version so i have knocked out the old studs and drawn in the new longer studs, no problem there.Went to push on the spacer over the 5 studs but on my disc between 2 of the studs is a bobbin of metal with a small bolt in it and this is stopping the spacer from going on.It is at a different pcd to the spare holes drilled in the eibachs.What purpose does this bobbin serve? is it a disc jacking off point? Can i grind it off so the eibach goes on? Do the rear discs have this same bobbin on them? Waiting in anticipation for the experts to reply. Thanks.

[nurrish]

That is there so you cant put rear wheels on the front. The bolt simply unscrews

[witstu]

Cheers Nurrish,so if i undo the bolt the bobbin of metal comes off with it?

[nurrish]

Cheers Nurrish,so if i undo the bolt the bobbin of metal comes off with it?

 

Yes

[gunmetalzgt]

Cheers Nurrish,so if i undo the bolt the bobbin of metal comes off with it?

 

don't worry about it, i had to do that too with the proper spacers from CS.

 

Hope the rest of the job goes smoothly

[M13KYF]

moved

[witstu]

Thanks boys got the fronts finished this afternoon.

[gunmetalzgt]

Thanks boys got the fronts finished this afternoon.

 

Good job!! I bet you're well pleased, i know the difference it makes

[Danny 350Z]

Have you sorted your problem, Stu?

[witstu]

Yes, cheers Dan. Got the fronts done thanks to advice from nurrish.If weather allows will get rears done next week.