Liam's Z Posted July 6, 2006 Posted July 6, 2006 Wanted - Clear Front Reflectors Pm me P.s no dodgy ones off ebay...... Quote
lomoto Posted July 6, 2006 Posted July 6, 2006 Wanted - Clear Front Reflectors Pm me P.s no dodgy ones off ebay...... why whats wrong with the ones on Ebay?? Quote
Liam's Z Posted July 6, 2006 Author Posted July 6, 2006 Wanted - Clear Front Reflectors Pm me P.s no dodgy ones off ebay...... why whats wrong with the ones on Ebay?? Sorry Tim, I'm not being clear.....Heard bad reports about the US ones that's all Quote
lomoto Posted July 6, 2006 Posted July 6, 2006 Wanted - Clear Front Reflectors Pm me P.s no dodgy ones off ebay...... why whats wrong with the ones on Ebay?? Sorry Tim, I'm not being clear.....Heard bad reports about the US ones that's all Oh ok I was looking for a set of these as well , glad you warned me about the cheapo ones Quote
Liam's Z Posted July 6, 2006 Author Posted July 6, 2006 Wanted - Clear Front Reflectors Pm me P.s no dodgy ones off ebay...... why whats wrong with the ones on Ebay?? Sorry Tim, I'm not being clear.....Heard bad reports about the US ones that's all Oh ok I was looking for a set of these as well , glad you warned me about the cheapo ones Np Quote
holdcroft2005 Posted July 7, 2006 Posted July 7, 2006 Hi guys i can supply genuine nissan ones uk spec for £29.99 delivered to your door cheers john tel 01782 204268 email john.colley@holdcroft.com Quote
Liam's Z Posted July 7, 2006 Author Posted July 7, 2006 Hi guys i can supply genuine nissan ones uk spec for £29.99 delivered to your door cheers john tel 01782 204268 email john.colley@holdcroft.com Cheers John,,, I'll call you later Quote
Hope4sun Posted July 7, 2006 Posted July 7, 2006 Hi guys i can supply genuine nissan ones uk spec for £29.99 delivered to your door cheers john tel 01782 204268 email john.colley@holdcroft.com Some one always sells something, just after i've had it shipped in, and always for less lol, i'll be posting a full fitting thread with pics shortly. Andy Quote
Johnnybanjo Posted July 7, 2006 Posted July 7, 2006 Good luck fitting them. I tried and gave up. I removed the 10mm bolts from the bottom of the wheel arch and managed to see the lense and the 2 holding screws, but with the screen wash bottles, etc. I fear it definitely a bumper off job. Needless to say they are still in the box. Quote
Guest prescience Posted July 7, 2006 Posted July 7, 2006 Hopefully this should help, not all of it is relevant http://www.350z-uk.com/forum/viewtopic.php?t=293 Quote
Liam's Z Posted July 7, 2006 Author Posted July 7, 2006 Good luck fitting them. I tried and gave up. I removed the 10mm bolts from the bottom of the wheel arch and managed to see the lense and the 2 holding screws, but with the screen wash bottles, etc. I fear it definitely a bumper off job.Needless to say they are still in the box. These for sale yet then Quote
Hope4sun Posted July 7, 2006 Posted July 7, 2006 Hopefully this should help, not all of it is relevanthttp://www.350z-uk.com/forum/viewtopic.php?t=293 Thanks mate, that was the link i was looking for and could'nt find again to follow tomorro, wether permitting, failing that, i'm helping put a Supra engine in over the weekend, so will have all the tools for a bumper off, but hope to avoid that one Andy Quote
Guest prescience Posted July 7, 2006 Posted July 7, 2006 I'm sorry to have been so helpful cos Im in unhelpful mode now Quote
Removed Posted July 7, 2006 Posted July 7, 2006 I'm sorry to have been so helpful cos Im in unhelpful mode now translated: drunk once again Quote
Bluffy Posted July 7, 2006 Posted July 7, 2006 Hi guys i can supply genuine nissan ones uk spec for £29.99 delivered to your door cheers john tel 01782 204268 email john.colley@holdcroft.com have you got ones that will fit the 06 reg? Quote
Hope4sun Posted July 14, 2006 Posted July 14, 2006 Right going to get the install done this weekend if it kills me, after running out of time last weekend, but i did manage to get one wheel liner out and look at how much room there is, the water bottle is really in the way, so the bumper is coming off, just wondering after looking at the very helpful instructions (http://www.activetuning.com/pat/4/3/), That we have headlamp washers, which means as the bumper comes off, won't they need disconnecting or something, maybe the little washer cover will just unclip? Anyone know, i'll be sure to photograph the whole thing though Andy Quote
Removed Posted July 14, 2006 Posted July 14, 2006 That we have headlamp washers, which means as the bumper comes off, won't they need disconnecting or something, maybe the little washer cover will just unclip? Anyone know, i'll be sure to photograph the whole thing though Andy quite sure they just unclip mate Quote
Neil Posted July 14, 2006 Posted July 14, 2006 Hopefully this should help, not all of it is relevanthttp://www.350z-uk.com/forum/viewtopic.php?t=293 Thanks mate, that was the link i was looking for and could'nt find again to follow tomorro, wether permitting, failing that, i'm helping put a Supra engine in over the weekend, so will have all the tools for a bumper off, but hope to avoid that one Andy You cannot avoid taking the front bumper off mate...it's easy though. One pointer...the black plastic clips in the wheel arch and also on the top of the bumper in the engine bay require a knack to get them out (as I found to my cost!). Lift the centre piece and then push it in a little (until it feels free) and then lever the outer clip out. Once you have done one you can see how they clamp together. You do not need to disconnect the front washers by the way. The attached might help you as well. Neil Quote
Liam's Z Posted July 14, 2006 Author Posted July 14, 2006 Neil - links not working or is it me? Quote
Neil Posted July 14, 2006 Posted July 14, 2006 Neil - links not working or is it me? Nah.. It's probably me mate. You mean the pdf download? Neil Quote
Liam's Z Posted July 14, 2006 Author Posted July 14, 2006 Neil - links not working or is it me? Nah.. It's probably me mate. You mean the pdf download? Neil Oh if it's that one Ive already seen it! Cheers mate Quote
Hope4sun Posted July 15, 2006 Posted July 15, 2006 Hopefully this should help, not all of it is relevanthttp://www.350z-uk.com/forum/viewtopic.php?t=293 Thanks mate, that was the link i was looking for and could'nt find again to follow tomorro, wether permitting, failing that, i'm helping put a Supra engine in over the weekend, so will have all the tools for a bumper off, but hope to avoid that one Andy You cannot avoid taking the front bumper off mate...it's easy though. One pointer...the black plastic clips in the wheel arch and also on the top of the bumper in the engine bay require a knack to get them out (as I found to my cost!). Lift the centre piece and then push it in a little (until it feels free) and then lever the outer clip out. Once you have done one you can see how they clamp together. You do not need to disconnect the front washers by the way. The attached might help you as well. Neil Thanks for the links and info Neil, had found the pdf already, but really appriate the information , those clisp are little beggers, i remeber posting a guide on the GTRoc on how to remove them, then Nissan go and change the design slighty on the Z I'll let you know how i get one, hopefully i'll have time this weekend, maybe even at the meet tomorrow lol Andy Quote
Neil Posted July 15, 2006 Posted July 15, 2006 Hopefully this should help, not all of it is relevanthttp://www.350z-uk.com/forum/viewtopic.php?t=293 Thanks mate, that was the link i was looking for and could'nt find again to follow tomorro, wether permitting, failing that, i'm helping put a Supra engine in over the weekend, so will have all the tools for a bumper off, but hope to avoid that one Andy You cannot avoid taking the front bumper off mate...it's easy though. One pointer...the black plastic clips in the wheel arch and also on the top of the bumper in the engine bay require a knack to get them out (as I found to my cost!). Lift the centre piece and then push it in a little (until it feels free) and then lever the outer clip out. Once you have done one you can see how they clamp together. You do not need to disconnect the front washers by the way. The attached might help you as well. Neil Thanks for the links and info Neil, had found the pdf already, but really appriate the information , those clisp are little beggers, i remeber posting a guide on the GTRoc on how to remove them, then Nissan go and change the design slighty on the Z I'll let you know how i get one, hopefully i'll have time this weekend, maybe even at the meet tomorrow lol Andy What meet mate? JAE is next weekend You'll be on your own in a field if you go tomorrow Neil Quote
Hope4sun Posted July 16, 2006 Posted July 16, 2006 What meet mate? JAE is next weekend You'll be on your own in a field if you go tomorrow Neil Theres a mini meet here in the Far East (East of England that is) at the apt named "Rising Sun" pub, as for JAE I'm off to Sinagpore and Malaysia on Thursday so going to miss it for the first time in my life Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.