Lyger Posted August 5, 2009 Share Posted August 5, 2009 Does this work on Jap Cars?? 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2 seconds, the system will enter programming mode and will flash the warning lights twice. 4. Press and HOLD the unlock button on the Plip. 5. While pressing the unlock button, press the lock button 3 times. 6. Release the unlock button. 7. The warning lights will flash once to indicate successful programming. 8. Repeat procedure 4 to 7 for up to 4 plip keys. 9. When completed turn ignition ON, and the warning lights will flash 2 times. 10. Remove key, and check all plip keys for operation. Quote Link to comment Share on other sites More sharing options...
M13KYF Posted August 5, 2009 Share Posted August 5, 2009 in the Guides section viewtopic.php?f=35&t=15966 Quote Link to comment Share on other sites More sharing options...
Chris`I Posted August 5, 2009 Share Posted August 5, 2009 I seem to remember someone stuggling to get it to work on either a UK or JDM. Cant remember which sorry, A search should find it though. Quote Link to comment Share on other sites More sharing options...
Lyger Posted August 5, 2009 Author Share Posted August 5, 2009 Thanks M13KYF but was wondering if anything worked for jap cars think i might bite the bullet and try out the posted method. Quote Link to comment Share on other sites More sharing options...
Lyger Posted August 5, 2009 Author Share Posted August 5, 2009 Happy to report that this method worked on my Z33 350z 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2 seconds, the system will enter programming mode and will flash the warning lights twice. 4. Press and HOLD the unlock button on the Plip. 5. While pressing the unlock button, press the lock button 3 times. 6. Release the unlock button. 7. The warning lights will flash once to indicate successful programming. 8. Repeat procedure 4 to 7 for up to 4 plip keys. 9. When completed turn ignition ON, and the warning lights will flash 2 times. 10. Remove key, and check all plip keys for operation. Happy days!! Quote Link to comment Share on other sites More sharing options...
Chris`I Posted August 5, 2009 Share Posted August 5, 2009 Nice one mate Quote Link to comment Share on other sites More sharing options...
Lyger Posted August 14, 2009 Author Share Posted August 14, 2009 I can also confirm that the slightly larger keys with 450mhz written on the back DO NOT work with jap cars!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.