steve3000 Posted September 24, 2008 Posted September 24, 2008 What a morning! I'd finished fitting new brakes all round at the weekend, after Z failed her first MOT (must say thanks bigphill for parts & advice). Thought all was well for today's retest but she almost didn't make it though... Parked up outside the MOT garage, one hour to spare. Quite a steep slope in their car-park, so handbrake on full and release brake pedal... Z starts slowly rolling backwards... ARG! 10 minute drive home, whip the ashtray out to find the handbrake adjuster - doooh! can't find my 10mm deep socket... whip the jack under the diff and lift rear of car, wheels off, and start fiddling with a screwdriver at the brake shoe adjusters... 10 minutes later handbrake much firmer, wheels on, car down, back round to MOT station with 5 miniutes to spare. In the end she passed perfectly, well pleased! Steve Quote
martinmac Posted September 24, 2008 Posted September 24, 2008 Never in doubt then but always a relief afterwards Quote
steve3000 Posted September 25, 2008 Author Posted September 25, 2008 Yeah, I knew she'd pass, the handbrake adjustment was a one-off it was getting dark when I was putting the new rear brake discs on! Took some piccies of fitting the front&rear discs too, so will pop them up as a how-to for non-brembos when I get a minute. Steve Quote
martinmac Posted September 25, 2008 Posted September 25, 2008 Asked my dealer to adjust the handbrake twice when in for service under warranty, twice they forgot Quote
Chris`I Posted September 26, 2008 Posted September 26, 2008 Asked my dealer to adjust the handbrake twice when in for service under warranty, twice they forgot One thing Dan Perkins is good at, mine always comes back spot on Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.