Clutch master cylinder now! Replacement quide needed help!

[BongoDiv]

Hi

 

Some will recal i droppwd onto a 350z rag top which was standing for 13yrs.  Innevitably, now its being used daily issues are arrising lol.

 

I cjanged the slave clutch cylinder after pedal to floor issues and it wont bleed so now purchased a master cylinder.

 

Ive removed all the engine bay pipes and gubins easy enough but cant even see the two 12mm bolts to put a socket on! 

 

Do i need to drop the entire pedal box and ecu to gain access?

 

Peed off and missing the drive thrills so please help i wanna get this done and bled tomoz. Back on road asap.

 

Thanks

 

Bongo dave x

[ZMANALEX]

Just drop the lower trim above the pedals.

 

The 2 bolts and the clevis pin can be reached from there.

 

The ECU will not get in the way as it is on the other side.

 

Top Tip:  Bench Bleed the slave and master before fitting.

[BongoDiv]

There is a bcm or ecu above brake pedal below steering column with bcm caged connection whats this then pls? 

 

Thanks for reply btw 

 

Bongo

Edited 15 hours ago by BongoDiv
Coxk up

[ZMANALEX]

13 hours ago, BongoDiv said:

There is a bcm or ecu above brake pedal below steering column with bcm caged connection whats this then pls? 

 

Thanks for reply btw 

 

Bongo

That will be your ABS module.

 

Easily moved to the side to gain access to the master cyl. hardware.