Nikster Posted April 1, 2017 Share Posted April 1, 2017 Hi, I'll ve picking up a z this week and wondering whats I need to connect my xtrons double din fit and work with everything. I have a xtrons td618 from my lexus is200. I know I'll need a fitting kit and stuff but cab anyway advise ne exactly what one and what else I'll need? Thanks Quote Link to comment Share on other sites More sharing options...
MDMetal Posted April 2, 2017 Share Posted April 2, 2017 Do you the bose system? Ive just done mine and what I needed d was... https://incartec.co.uk/Pages/Product.aspx?P=2975 This is the main harness, you'll need to swap the red and yellow wire so the unit gets power correctly, the remaining blue wire on the harness is your antenna power so I cut that and linked it to the xtrons directly https://incartec.co.uk/Pages/Product.aspx?P=2651 This plugs into the steering box on the above harness and links to key1 and key2 on your xtrons Incartech do a kit with the facia as well but I found it far far too tight so im ordering from elsewhere After that I also had to modify my harness to turn the phono connections into an iso one, this is called the buster mod on the forums, just be aware your taking speaker outputs and connecting them to your amp,the volume levels will be louder! I've seen on ebay some rca to iso blocks if your not confident with your soldering Good luck its easy to do but lack of a specific guide did make it confusing so hopefully you'll find the above answers everything! 1 Quote Link to comment Share on other sites More sharing options...
Nikster Posted April 2, 2017 Author Share Posted April 2, 2017 Hi and thanks for replying. yes its a 2008 HR with the bose system. I'm alright with soldering. I struggled to find a fascia for my lexus aswell the xtrons seem to be to big for most Quote Link to comment Share on other sites More sharing options...
Nikster Posted April 2, 2017 Author Share Posted April 2, 2017 Ive attached a picture of the outputs on my unit. The manual says you can use steering wheel controls with it so I aasume its the same kind of setup as your one Quote Link to comment Share on other sites More sharing options...
MDMetal Posted April 3, 2017 Share Posted April 3, 2017 Can't see your file but I'll assume they have the same outputs I wired up a reversing camera at the weekend which is working perfectly 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.