wilo Posted September 9, 2016 Posted September 9, 2016 hi , i have tryed a forum search but I'm getting no results. iv just bought new driver and passenger side windows to replace my badly scratched ones but can't find a tutorial on removal and refit . my car is a 2004 DE UK model . so guys can anyone point me in the right direction please Quote
cov350z Posted September 9, 2016 Posted September 9, 2016 Not sure on a guide but it's not to difficult it's a case of removing the door cards and then a load of bolts from the door itself and you can see the window brackets undo about 4-5 bolts that hold the window in and then reverse install. Look for a window regulator install on forum same process more or less Quote
cov350z Posted September 9, 2016 Posted September 9, 2016 http://my350z.com/forum/maintenance-and-repair/361241-how-to-repair-stuck-broken-window-motor.html Quote
cov350z Posted September 9, 2016 Posted September 9, 2016 Follow that to before they remove the motor and if you see the two window support legs there is a couple of bolts at the top connecting them to the window remove and then install new one. Can be done with one person but a friend would help and make it less of a pain lol 1 Quote
wilo Posted September 9, 2016 Author Posted September 9, 2016 Follow that to before they remove the motor and if you see the two window support legs there is a couple of bolts at the top connecting them to the window remove and then install new one. Can be done with one person but a friend would help and make it less of a pain lol cheers cov .ill have a go following the link Quote
Randy_Baton Posted September 9, 2016 Posted September 9, 2016 I had planed to do this, but was put of by everyone saying its a PITA. That doesn't look too hard. Where did you get the glass and how much did it cost? Remember to clean out the felt pads and window seals, as its grit thats caught up in these that has created the issue in the first place.e 1 Quote
wilo Posted September 9, 2016 Author Posted September 9, 2016 I had planed to do this, but was put of by everyone saying its a PITA. That doesn't look too hard. Where did you get the glass and how much did it cost? Remember to clean out the felt pads and window seals, as its grit thats caught up in these that has created the issue in the first place.e company called emperor tuning on ebay.i think he's now a member on here too. very quick delivery and always answers emails fast ...just unpacked them and theyre in good condition Quote
wilo Posted September 9, 2016 Author Posted September 9, 2016 drivers side done and working sound. thanks for the help and advice guys Quote
wilo Posted September 9, 2016 Author Posted September 9, 2016 How long did it take? an hour tops ..never done out like that before either.plus i found a quicker way than on the tutorial for when i do the other side Quote
wilo Posted September 9, 2016 Author Posted September 9, 2016 oh and I highly recommend emperor tuning guys . i asked for scratch free glass replacements and i gave them a wipe with bit of glass cleaner spray and there like new units. very pleased Quote
wilo Posted September 10, 2016 Author Posted September 10, 2016 new problem guys ..is there a reset procedure as when the window is fully up i can now hear wind noise that wasnt there before . Quote
cov350z Posted September 10, 2016 Posted September 10, 2016 Yea Google just Google it there plenty pages and a video on you tube I think Quote
cov350z Posted September 10, 2016 Posted September 10, 2016 There is also a screw on the inner door card (the metal one you took off to get to window) it's an adjustment screw moves the top of window in or out to create the seal Quote
wilo Posted September 10, 2016 Author Posted September 10, 2016 Found this for you cheers cov think it may just need adjustment on the screw as its only mm out Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.