Tricey27 Posted April 27, 2016 Posted April 27, 2016 Hi, I bought a Nissan 350Z 2003 just over a year ago now and all was ok. After a few days of owning it I installed a new Headunit (Pioneer DA-SPH120) and built the dashboard back up. The radio is functioning perfectly but the only problem im having is when I have the heating on “Auto†the blowers just blow at full speed constantly, its as though it is receiving no cabin temperature. Does anyone know of any remedy? Or can anyone tell me the location of the interior temp sensor so I can check its correctly connected? I don’t recall it doing this on the journey home from collecting the car. Many thanks in Advance Quote
Mattbowles Posted April 27, 2016 Posted April 27, 2016 Check the ribbon cable that attaches to the three control dials? I seem to remember that made my fans run at full speed when unplugged. Quote
Tricey27 Posted April 27, 2016 Author Posted April 27, 2016 Checked that, All ok. All my adjustment controls etc. are working so seems there ok. I checked and cleaned them connections just to be safe. But no luck. Thanks Quote
ZEUS Posted April 27, 2016 Posted April 27, 2016 You've not damaged the ribbon while fitting the stereo? Are you sure it worked correctly before fitting? Could be the White control box that's faulty. 1 Quote
samsniss350z Posted April 28, 2016 Posted April 28, 2016 I'm in agreement with Zeus here, they're not the hardiest bits of equipment and can be responsible for a multitude of sins when even slightly damaged Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.