AngryHippo Posted January 30, 2016 Posted January 30, 2016 Hi there, just changed my steering wheel to a sparco one with a momo hub!for some reason it feels really stiff to turn the wheel after changing it, kind of like I have lost my power steering. Any ideas? Sent from my SM-G925F using Tapatalk Quote
Zeezeebaba Posted January 31, 2016 Posted January 31, 2016 Is it a smaller diameter than the OEM wheel? This wouldn't help due to simple physics. Highly unlikely changing a wheel would affect any mechanism. Put the original wheel back on to rule out mechanical/electrical failure just in case. Quote
cov350z Posted January 31, 2016 Posted January 31, 2016 its the nut done up to tightly ^^^^ it puts too much pressure one the spiral cable housing undo it a fraction dont know what the torque setting is but if i remember its not that much ill have a look for it Quote
cov350z Posted January 31, 2016 Posted January 31, 2016 http://www.nicoclub.com/FSM/350Z/coupe/2003/ps.pdf 29-39 nm or 22-28 ft lb not alot really just hand tight Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.