zebedee!
-
Posts
72 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by zebedee!
-
-
What you will need to include is the PCD which as mentioned above is 114.3, that they are 5 stud and the offsets, these will be different front to back i would think and should be stampped on the back of the wheels.
-
Here is the link for the yahoo auctions:
-
What are people looking for though it's possible i could sort out some parts off the yahoo auctions in Japan as i have a buyer over there that i can use and i trust the problem comes when people want large or heavy parts.
Simon
-
Were they the TSW alloys? not really what i'd want tbh
-
Thanks for the replys guys really helpful.
I'm a bit strapped for cash at the minute so i'm trying to get some nice wheels on the car for cheap
i got the wheels with very good toyo tyres for £400. I've had to buy a set of 20mm hubcentric spacers which i got a set of 4 new for £68. I hope to sell the toyo's as they are not the sizes i want then get the falkens and get the wheels refurbed. The aim is to try and keep to as near £1000 for everything as i can
-
I have a set of blitz split rims i'm looking at geeting re-furbed now these are 3 piece rims and apart from:
http://www.alloywheelrepairs.net/index.html
I cannot seem to find anyone else that will work on this kind of rim.
Does anybody know of anyone out there that will as i'd like to get atleast one more quote.
Onto tyres the rims are 10J rear and 9J front by using the matia tyre calculator i was thinking of getting
285/35/19 rear
245/35/19 front
Have found Falkens at reasonable money are they any good and am i along the right lines tyre wise.
Simon
-
What Nokia's does the cradle fit?
-
I had one on a fwd drive car i had, but that was twice stock hp and they had a tendency to destroy engine mounts so used one to stop this which it did very well.
Really unless you are driving very hard all the time or launching very hard then really they are just unecesary underbonnet bling
-
So to make them ideal i'd need to run something like a 20mm spacer.
Does anyone know the centerbore of a 350z?
-
I've been offered a set of blitz 19" wheels from a friend they didn't come off a 350z and after a trial fitting the rears fit fine but the fronts need a spacer to miss the suspension arm.
The alloys are 9J x 19 and +42
Can anyone tell me what they should be offset wise to fit correctly as i'm thinking about spacers.
Simon
-
-
May do swaps on some of this stuff for 350z bits.
Sard Gauge set 60mm, 6 gauges:
Oil temp electric
Oil pressure electric
Water temp electric
Boost
Vac
EGT
The oil ones will come with a Toyota fit Mocal Sandwich plate with the sensors installed the plate will come with a new oring. Come with 2 greddy stands
£225
Will split if I get definite sales for most of them.
Sard fuel setting meter kit brand new never used £50
Facet road silver top pump kit comes with pump spare filter, mounting rubbers, pipe fittings and relay £60
Sealey engine stand 350Kg as new used once.
Same as this:
http://www.toolsnstuff.co.uk/product_in ... Path=6_106
£25
Pipercross panel filter will fit 305z, Impreza, legacy and S13 £10
NRG Engine Damper new never used think it fits civics but I brought it to make my own brackets and mount to another car. Comes with everything you see £20
Genuine Tokyo subway hanger been used and is a bit grubby but all adds to the look. £20
Toyota K series engine manual used but in ok condition no pages missing etc. £5
Tamiya TT01 1/10 S13 strawberry RC car
This is a Tamiya TT-01R chassis which has the following upgrades:
3 racing alloy shocks
3 racing ballraced alloy steering joints
Radio gear is 40meg Hitec stuff, it has a V16 ESC and 18 turn LRP motor it will also come with 2 x 4000mha batteries and a 12v or mains charger and a spare R34 skyline body. It comes with the wheels you see it on plus another set the same apart from being bronze and fitted with ABS drift tyres.
The body is an ABC hobby S13 with the front end removed and a Yokomo S15 front and the rear bumper fitted.
Looking for £150 everything you need is included.
ALL PRICES PLUS POST
NO DIBS FIRST TO PAY GETS THE ITEM
Thanks for looking Simon
-
Sound file coming soon
-
Imports in general not sure on the 305z have to have a restrictor fitted into the fuel filler to pass SVA/ESVA on the last car i had this could be removed there could be something like this fitted to your 350z.
If the nozzle is quite a tight fit then when filling the air probally hasn't got enough room to escape casing the nozzle to click off.
Example of a supra one:
http://cgi.ebay.co.uk/Toyota-Supra-type ... dZViewItem
Maybe some of the importers can shed some light on if they fit one?
Simon
-
-
yeah, but why "Dave"
I did hear that it's the name of the fella that owns UKTV so he decided to rename one of the channels after himself but how true that is
-
Daft question but will these fit straight on without any issues?
Simon
-
Can you get a good price on tyres Phil? If you can what sort of money would we be talking with tyres?
Also can you get these in Bronze too?
Simon
-
Very pleased with the 5zigen pro racer exhaust i collect this week and fitted on Saturday. Brought from Envy who did me a very good deal on it with a pop charger which i fitted at the same time.
The quality and fit was great and i'm really impressed with the sound from it
It's Jasma stampped so under 90DB which is nice as it doesn't drone at higher speeds and i can drive it quietly when needed but when you want some noise i think it's just right all in all very happy Will get some pics and a sound clip or small vid asap
Simon
-
Selling due to upgrade as new condition with box.
£15 posted
Simon
-
Welcome!
Not happy with all these people finding NISMO kitted Zeds when that's all I'm looking for!!
didn't even go looking for this one i'm a big fella and have been looking round at lots of cars and have been finding that alot were too small (ack of head room mainly) so when i thought about a 350z i just went to look at the nearest one then it dawned on me how perfect it was -
P.m. me a price for items 1 and 3 please
-
Thanks for the warm welcome guys
Here are some poor pics of the new car it's a gt with the nismo kit and rays wheels:
-
Looks like this is the best place to start
I'm Simon from Lincolnshire and i have just brought a 350z i collect it next saturday just in time for the jap show so should hopefully see some of you guys on the Sunday
This is a radical departure from my previous car which i've just sold:
Aswell as cars i'm also into RC's so time for a 350Z body i think
This is my latest creation:
Simon
stueys polished rims
in Wheels
Posted
Problem i'm having is when you mention the words "split" and "rim" to anyone that refurbs wheels they all seem like they just won't touch split rims of any kind
I'm thinking about getting the blitz wheels all painted even the lips when i have the refurbed but don't know what colour to get them done