Jump to content

max

Members
  • Posts

    726
  • Joined

  • Last visited

Posts posted by max

  1. Not too worried about the the noise just a little p---ed they replaced the clutch even though they could find nothing wrong, for them to tell me it now needs a new gearbox at my expense, the rattle has been there from new.

    max.

  2. Had my clutch replaced last year @22,000 miles under warranty after i complained about the release bearing being noisy, just had the car back for its service and have been told it is not the bearing that is making the noise but is a bearing in the gearbox, the car is now out of warranty and has now done 28,000 miles.

    After I spoke to Nissan today they want me to pay for the gearbox to be removed so they can check to see if the clutch needed to be replaced or the problem was originally wrongly diagnosed before they will take any responsibility, the problem I have with this is once the gearbox is on the floor they walk away and I have to pay for all the repairs, would this be normal practice from Nissan to ask or are they just trying to fob me off.

    Max.

  3. Fibreglass and fire don’t really mix well, it started with a small petrol fire which I thought I had put out using a full 5kg powder extinguisher it then took less than ten minutes for it to look like this with me hiding behind the garden wall,when i have more time i have promised myself i will build another one.

    max.

  4. I have been able to source my first choice of wheel from a company in Scotland(not just good roads) thanks to cs for all the help.

    max.

     

    [attachment=0]Dtm-Silver-425x425.jpg[/attachment]

  5. Using the image below my wheels would have an offset of +30 but i'm sure they are stamped +20, i really like the way my old wheels fill the arch, some of the wheels i have been offered have +43 offset which i take will move the wheel back 13mm am i correct.

    max.

    [attachment=0]Offset.jpg[/attachment]

  6. Went for a run today and had a look at these have to wait until Monday for information on the ET.

    max.

    [attachment=0]Dtm-Silver-425x425.jpg[/attachment]

×
×
  • Create New...