violet.yata

What is NDSII?

Hey guys, Posted before but imma keep trying as I am non wiser and still very confused. Having an issue with the central locking, the interior switch for the lock does nothing (no sound other then the switch moving, no relay, no lock movement) I can unlock the door with the key and the alarm goes off which can then be turned off by putting the key in the ignition heres the things i have tried - - checked the switches on the drivers side (replaced them aswell) (replaced them again no joy) - Checked the wiring using the US FSM - cant find a UK version so couldn't confirm some steps - Multimeter to check current from wires to grounds blah blah blah all consistent nothing showing any faults in the wiring. - put in a new BCM from ZEMANALEX (still no joy lock button does no thing) For some context i cannot lock the car with the key fobs as neither of them work

old post but did you figure out what the cause was? I have a similar issue with the switch not working and both my keys dont work. everythign else fucntions fine. cant try reprogramme the keys without the door lock switch working.

Afternoon all, I just got my first z bit of a project. It’s got a couple minor things first thing I’m trying to tackle is the lock issue. You can use the manual locks to open both doors. You can use the key to unlock the outside door but this sets of the alarm. what you can’t do is use the key to unlock the car with the fob and you can’t use the internal switch to lock and unlock the doors. does anyone have any good pointers to what could be the issue or where to start with. I’m going to check the internal fuse board and see what that’s like first. TLDR: Inside power lock no work key fob no work manual locks inside and outside do work (but sets car alarm off until key is in ignition)