Jump to content

Sam_Wilson95

Members
  • Posts

    5
  • Joined

  • Last visited

About Sam_Wilson95

  • Birthday November 3

Location

  • Location
    Nottingham

Sam_Wilson95's Achievements

Z Newbie

Z Newbie (1/7)

1

Reputation

  1. i've sent them a message as well as to Bob with any advice they could supply in the meantime i've just used some old washers but still get vibration from the pipe on the brace
  2. hi guys i wonder if anyone can help with how they got around with fitting the W brace with a larger bore exhaust without hitting and pushing the centre pipe up and vibrating I'm fitting the tarmacsportz replacement W brace either being thicker than the OEM i'm unsure is it safe to use washers to space it away from the pipe? or are there spacers to buy for this exact job? thanks
  3. From what i have seen online it appears to be normal, it was the sudden change of action by the gauge whether it wasn't reading correctly before thank you for taking your time to comment the help is appreciated
  4. hi guys, new here and to forums in general so apologies if this is incorrect This morning i had decided to run the car till warm on the drive due to lockdown and noticed the oil pressure gauge spiking more aggressively than before when revving the car and driving i know it is normal for the pressure to increase with rpm as the oil pump is dependant on the engine rpm before today it never exceeded 60psi only when in 6th but now the needle easily exceeds when rolling from still at around 2k rpm or idly revving some key points to note are the car is filled with oil with no oil leaks visible or on the ground, it also doesn't burn oil as i were pointed out before purchasing a 350z that they will consume oil could it be a faulty oil pressure sensor? or is this just the norm? thanks for any advise in advance
  5. 1. andy James PAID 2. Andrew_Muxlow PAID 3. SHEZZA PAID 4. Vallis10 PAID 5. Sam_Wilson95 PAID 6.
×
×
  • Create New...