Alangorst

I would love this! Don’t suppose you fancy a 350z and some cash ?

Hi all looking for coilovers or a set of lowering springs and possibly shocks, also after some new wheels either 18s or 19s but want wide 9 or 9.5 upfront and 10 or 11 rears Also possibly looking for a aftermarket front bumper and rear might also be interested in some facelift headlights thanks Alan

If I turn off tcs off at the button the car still doesn't like some things such as heavy left foot breaking so when I really want to play I've been disconnecting my brake pedal switch which lights up my dash like a Christmas tree and disables my brake lights also ( which isn't too handy) so I was more looking for a way to play but still have brake lights and it turns out best way to do this is seemingly removing the 50 amp in the engine bay as the video above also stated all private road / land use obviously. I've drove a s13 with a welded diff so know what they are like in town etc but tbh I'm not to fussed on this and my car is already not the nicest thing to drive around town due to a ultra light weight flywheel and 6 puk sprung paddle clutch

Thanks for your reply bud I've been in contact with a guy on the Facebook page for 350/370z owners and I think I have the information I need

Hi all planing on welding my standard lsd up, was just wondering how easily done this is? And what I will need to disconnect to run this without traction control etc constantly kicking in. thanks alan

Did you have any luck getting a panel? I could cut my shell up possibly?

They were second hand bud they came off my donar car, only reason I didn't use my own was because the brackets on the other ones were powered coated green and I couldn't be bothered to swap the brackets over.

Hi all thanks for your suggestions, was the front left abs sensor causing it!! All sorted now and going strong 💪ðŸ»

Hi all recently changed all my front suspension (like everything) fitted another steering rack along with tien extended arms and track rod ends. The steering rack was centred etc but first outing it flung on the vdc and slip light I thought this was down to it not being tracked, just went and got it tracked and everything is straight but it's still throwing these lights on does anyone have any ideas why? Could it be a bad abs sensor as I replaced these also. Cars a 2002 import. Thanks alan

í ½í±Œí ¼í¿»

Like the wheels! What's the spec of them if you don't mind me asking ?

How it's currently sitting! 😢 Solid engine mounts arrived today 😬And track rods and ends here tomorrow... unfortunately though I've fractured my elbow and won't beable to put it back together for a number of weeks.

Thanks all 😆

Cheers bud yeah the holes in the bumpers were a boredom thing one day hah don't know how I feel towards them fully but no going back now 😂👌🻠The plate was just a random plate that's been sat on retention for a ages and I wanted to hide how old my zed is hah then after it being on for a while I noticed the V2+2+2 thing

Yeah I'm Aware on who owned the car was speaking to him a while Back. The plates just on the standard bracket but the clip that holds its down is broke so it just sits where it wants really 😂

Hi all this is the build of my zed. Bought it in November 16 off a mate. Pretty standard , nisei springs and shocks , nismo arbs , hks legimax exhaust and custom made y piece and de cats. Decided before I bought the car that this one definetly needs a BGW so bought one and got some 19s to for it as well. After this I decided it was time for a new clutch and gearbox as mine weren't the best. So picked up a good used gearbox and bought a dc performance stage 4 clutch and ultra lightweight flywheel. Got bored one day and seen a hole saw sitting at my mates and decided to cut holes in my bumpers and tuck the rear bumper. Car then got took and I got a custom made single exit exhaust for it and decided it would be good to put the private plate on the car and remove all the interior from behind the front seats , fit some buckets and a harness bar 🙄 So now the car was driving as it should with its new box and clutch I decided the body was a bit rough and needed tidying up. So I stripped it all down , rolled the rear arches , smoothed the z badges out of the wings , smoothed the front bumper , smoothed the tailgate and smoothed out the aerial hole , took the whole car back to bare metal and got a mate to give it a quick lick of paint for me! Which turned out like this. That made the car look a little different. Whilst I had my car stripped down to get painted I purchased a green 350z donar car that has some powder coated suspension parts on it ( so be it they are yellow , green and orange ) but the next move is to change every single component on the underside of the car , clean all the floor and schutz it Currently I have the front all stripped out and the front inner arches all tidied up, just waiting on some solid engine mounts arriving and some tien track rods and track rod ends. 😬 Once all that's done I intend on a plenum spacer or a plenum and then go and get her mapped as it's still restricted from jap land. This is what some of the suspension looks like, everything coloured is staying the colour that it is🙄 Well that's it for now really!

Just before I got it About a month of owning it 5month of having it

Alright this is my zed it's my second one and I've had it for 6 months