Such A Fairlady

Ive had a few codes coming up for a while. And was wondering where to buy a new throttle body? As this is what seems to be the problem. Or if anyone is selling a decent 2nd hand one? Thanks, Sam

Oh really? This wouldnt have anything to do with the flap of the throttle body being touched would it? As i took it into a garage and they took the plenum off to do the knock sensor harness as i did the sensor but wasnt just that. I made sure i didnt touch it as in the video i saw said it can ruin it all and had no problems toqued it all etc ran fine none of those problems till after the garage. Is it just me thinking too hard and a Coincidence? Also p1229 sensor power supply short? And after driving it the other day its when i turn right? Cheers, Sam

Cheers guys much appreciated! Am i right in thinking the position sensor will reset when i take the neutral off the battery for longer than an hour? Would this reset it or is it more likely a problem with the sensor itself?

Alright mate, wondering if you are breaking the shell? If so, how much would you want for the rear drivers side wing?

My car keeps going into limp mode around corners and sometimes in high revs. Anybody had this problem? Car goes fine apart from when it limps. It recently went in for a knock sensor loom replacement and ive heard before that the throttle body sensor can become loose inside? P2122 P2138 keep coming up. Cheerd, Sam

Yeah i think they are £500 upwards. Ill see if i can find him on here and see how easy it is to do. Cheers for your help mate

Ok cheers mate, ill give them a call tomorrow

http://www.ebay.co.uk/itm/Tein-Street-Flex-Damper-Coilovers-Nissan-350Z-Z33-Track-Race-Drift-Hill-Climb-/321832664699?hash=item4aeeb8be7b:g:Uo8AAOSwLVZVzw9T http://www.ebay.co.uk/itm/TEIN-Flex-Z-Coilovers-for-Nissan-350Z-Z33-Incl-Cabrio-2002-2008-/311652364204?hash=item488fedafac:g:0Y8AAOSweWVXf3gl I have found these two of the tein coilovers, they look ever so slightly different and different name. Is it a stupid question but are they the same ones? As i cant find anywhere that there is a difference. Or i have found these meister-r's? If anyone has any views on them? https://www.meisterr.co.uk/products/zetacrd/

Hopefully these ones work.

I have a big dent in my rear drivers side panel that i want to get pulled out. Ill add some photos later, just wondering if its easy transplanting a new wing instead i know itll have to be welded on etc but not sure if itll cost more than all the panel work and stuff needed. The car is stage 3 pearl white aswell so if anyone knows any bodywork places around near colchester essex area. Thank you, Sam

Just wondering where around near me is a good place to get the lady mapped after fitting my new Y pipe etc. Thanks guys, Sam

Just wondering what peoples opinions are on the different brands. Thinking either tein flex's or BC coilovers. Anyone recommend either of them or others under £1000? Any help or views would be good. Thank you, Sam

I was looking at the clippy on one, are these easy to fit on? And do they look good or @*!# quality?

I did think about getting the gen rocket bunny one but with import tax etc. i reckon itll cost me a fair bit! Think ill just leave it to be honest unless i get a big gay spoiler. Whats peoples opinions on the best looking spoiler?

Thank you, just messaged now. So hopefully get it changed and stop going into limp mode.

Anyone had any experience with these? They look pretty good in my opinion but they look a pig to fit? http://www.ebay.co.uk/itm/Nissan-350z-FIBERGLASS-Ducktail-Rocket-Bunny-style-Low-Level-Spoiler-/301828415418?hash=item4646601fba:g:oK8AAOSwk1JWcss8 Cheers, Sam

I was wondering the same, what diffuser are you looking at? http://www.ebay.co.uk/itm/NISSAN-350Z-RACE-DRIFT-BODY-KIT-BODYKIT-rear-bumper-DIFFUSER-/361463829554?fits=Car+Make%3ANissan%7CModel%3A350+Z&hash=item5428ec5432:g:N80AAOSwFqJWjtPc I was looking at this one, ive got the rear spats like the one in the pic so i wouldve thought it would fit. Anyone know if these are any good or will they be an ebay fall apart type thing?

Don't know if this is the right place. But anyone know anyone I could get a knock sensor off? And would thee be need to replace the plenum spacer and the bottom one too? Cheers, Sam

Good paint shops near colchester? I've got a pearl white 350z and need a bit of touch up. Anyone know any good places as I heard it's a hard colour to match. Thank you, Sam

I have a pearl white 350 and need to get some paint work done and been told pearl is really hard to match. So not looking for a @*!# job don't mind paying if it's worth it. I live in Essex near colchester and wondering if anyone knew anywhere nearby who would do a good job? Many thanks, Sam