Jump to content

bladerunner

Members
  • Posts

    39
  • Joined

  • Last visited

Posts posted by bladerunner

  1. Hi folks, Has anyone got a link to where i can source the rubber hangers that sit right behind the rear bumper, These are not readily available in any of my local factors.

    It is the bushes with the mounting holes at 90 degrees offset i am looking for.

     

    Thanks in advance

  2. I just had an Alpine HU fitted last week and have found out that it will not read all my phonebook numbers, it will only update around 12 numbers as phonebook entries but it does recognise all my dialled and received/missed calls. Not sure if it is a compatibility issue or not, The headunit has advanced bluetooth and my phone is a Samsung s6 edge.

  3. My stock intake pipe has a short "dead end " pipe with around a 1" bore that is bolted to the plenum, this small pipe branches off the main intake to the left side but as said goes to a dead end................. Would this be the "Resonator"

  4. I know there are numerous threads regarding this subject but here we go....................

    Just fitted a new Alpine head unit in my Z, all went well until i tried to power it up and yes you guessed it..........................................NO power at all anywhere, refitted the bose unit and all worked fine, tried the alpine again with all the connections and it turns out that the bose unit was using the radio antenna as an earth, once that was sussed out i found i had power but no sound, mmm after a bit of trial and error i found a blue/yellow wire in the new harness that when connected to a wire in one of the multi plugs (more trial and error) i found sound and lots of it. Once this was identified i only had to lengthen this blue wire and bingo we have a fully functioning head unit with Blue tooth and facebook, it plays audio from a hard drive or an sd card through usb too. Happy Days.

  5. Hi folks, just picked up my Zed tonight (pics will follow soon )

     

    I have been sitting familiarising myself with the switches and things and i have come across an illuminated switch next to the traction control button and i have no idea what this switch is for, also am i right in thinking that the centre cubby lid is meant to retract into the dash? what would cause this lid to just go to the open position and stay there..............Do i need to give some gentle persuasion or should it retract under its own steam?? Can you fantastic people give me the answers.

  6. Hello Folks, Just joined the board as a new owner of a 350z, I have had a smooch around the forum and i am very impressed with the mass of technical info here. I am hoping to have some good times here on the forum and getting to know the 350z.

     

    Going for a look round the gallery pics.

×
×
  • Create New...