Fuli

Because I use 27/650 slicks , and 9,5s are too thin for them. ( its like a 285/35 in street tyre size ) What's this jdmdistro / japwestmods ? Do you have link for them?

Is it a full bolt-on kit with every necessary parts to install it ? Does it's quality better than Motordyne's spacer or which one should I choose? I had a wasso spacer in my first zed and then when I got my second one I got a motordyne. Must of had my motordyne in for a a month or so before swapping out for a wasso spacer. Reason for this is the motordyne spacer is manufactured in 2 parts then stuck together which just wasn't for me. While the wasso ones are machines from one piece resulting in less possibility of leaking. All hardware comes with it and in a nice colour also Thank You! I will take this wasso one!

Is it a full bolt-on kit with every necessary parts to install it ? Does it's quality better than Motordyne's spacer or which one should I choose?

I'm looking for a set of ultralight 18" x 10j or 10.5j wheels. Should be under 9kg / piece, 5 x 114,3 , offset around 15-25 , like Enkei RPF1 or similar.

Looking for a plenum spacer, I've read good things about Motordyne, but if you have better alternative just tell...

Tarmac or Clark for new one or wait for another second hand to come up on here. You can always post a wanted ad as you never know who is holding onto parts Clark?

Where can I buy one? Only in tarmac or there is any other solution to get it in a lower price?

I'm interested in too.. Is it still available??

Guys! Do you have any idea where I can buy a motordyne plenum spacer? I have read some good reviews about that. ( opinions? ) I have just found this: http://www.tarmacsportz.co.uk/GB/350z_Motordyne_Basic_Plenum_Spacer/350MD516PS_.aspx Is it a good price or available somewhere else in the eu at a lower price?

Next project can be equal length headers with decat pipes. I could buy a set of new Stillen ceramic coated headers about half price, but honestly I didn't like its quality... Is this a good quality?? :

Photobucket doesn't works, try upload some photos via tapatalk.: Current: '11 Audi Rs3 for daily fun '03 Nissan 350z for TimeAttack racing Past: '08 Audi S3 SB 330hp '06 Subaru Sti over 600 hp

Thank You Guys! Here are some more pictures: ( Why I can't upload more than 750kb on one post??? )

Hi Guys! I'm new here, so a few words about myself: I'm 30 and living in Budapest, Hungary. I had ( and also have ) some sportscars in the past 12 years, subarus, audis and the like. 2 years ago I've bought a '04 Nissan 350z ( 280hp european version with 6speed manual and brembos ). Last year I started racing in the national time attack series with it, as a full stock car. I nearly won my category, ( i was 2nd because i had to skip 2 rounds ) For this season we decided to participate in the pro category and make the car a bit lighter and do some upgrade on the suspension too. The plan was to reduce it's weight min. 100kg and gave fully adjustable cambers and coilovers for them. So the current setup: '04 Nissan 350z ( VQ35DE - full stock engine ) - Driftworks Handling Pack ( HSD monopro coilovers , adjustable arms around, ) - Sparco Pro2000 seats, RRS stearing wheel, - -113 kgs out ( + 2x 11,5kg seats with brackets so the balance is -90kg from its stock weight ) - EBC black grooved sport discs with Ferodo DS3000 racing pads - Japan Racing JR11 wheels ( 9,5x 18 front and 10,5x 18 rear ) - slick tyres on the way. I hope you will give some advice and good ideas for my build, so that's why I'm join this community. Try to attach some pictures: