Chris141084

The pickburn arms just off the a1 near Doncaster? If so, count me in, it's only ten mins from my house ☺ï¸ðŸ‘

As I've upgraded my head unit my steering wheel controls are now unused. Has anybody got any without the holes for the controls?

I know it's pretty crap stuff, if I can't pick anything better up this morning then it'll be better than nothing

Do we think Meguires carnauba liquid wax will be OK to use on my wrap? I have some already and want to wax the car before going to the coast tomorrow afternoon

2nd dibs on the valve caps if they don't end up selling

Might have to get some of that, an orange car that smells of oranges sounds ace.

Ian, auto finesse do a chocolate scented car shampoo 👠better chocolate than either marmite or bovril!!

I'll let a pro do it then, I'll probably ruin it if I do it myself

Thanks for the advice mate ðŸ‘

Thanks Ekona, it's hexis UK glitter Orange, so more gloss than matt (crazy shiny in the sun) I haven't cleaned it yet since picking it up as rsv advised me to let it go off for a few days before washing it.

A ceramic coating sounds good, I'll have a look into them and get some. I'm guessing there is no need to use a clay bar on a wrap? used to use it on my paint work.

My old apprentice Paul has a gun metal Zed and lives in Rawmarsh near Wath. Don't know who's the blue soft top is tho. I live out in Conisbrough now but used to live in West Melton. You'll know mine if you see it now, it's been wrapped in glitter Orange 😀

I was in my way to work too, nice to know I'm not the only one up at silly o clock ☺ï¸

Recently had my Zed wrapped, wanting some recommendations for products to keep it clean. Also a wheel cleaner that won't ruin the wrap if I get over spray on it. Any advise would be welcome ☺ï¸

Welcome along, good luck with the hunt ☺ï¸

Spotted a black 350z this morning turning left onto Doncaster Road from Kilnhurst, at about half five this morning. Anyone in here?

ive have a ep3 one an a metal silver 3 inch one you can have if you collect it

Nice one â˜ºï¸ Do you have any pics of them on or off the car? Where in Manchester are you? Pm me mate ðŸ‘

I think i have a spare honda stubby mate as i brought two, ill have a look and let you know

Cheers mate ☺ï¸

Is this the one? http://www.ebay.co.uk/itm/Nissan-350Z-Aerial-Arial-Ariel-Stalk-Antenna-/282408032177?ssPageName=STRK:MESE:IT

How long is this one mate?

Tarmac sportz mate. Can be found on pro traders on here.

I was just wondering if there were any second hand ones about before I messaged Chris ðŸ‘

I'm after a Stubby aerial for my 350z

Just booked a hotel for the night, see you all down there ðŸ‘

Lettering received

Thank you ðŸ˜

My new ones cost me around £50 from Nissan for all four nuts and bolts, think your dealer is trying to rip you off!

I have two that are OK, just can't remember whether they are the toe or camber bolts. Are you anywhere near me? Conisbrough, Doncaster

Chris at tarmac sportz had some single exit exhausts in stock, might be worth a pm or a visit to his site

There are four resets, the ecu, throttle body positions, and I really cant remember the name of the third, think its the idle air volume reset. I had a similar fault, did these three it that order and it was cured â˜ºï¸ this is the link with the guide I followed

http://www.350z-uk.com/topic/53148-how-to-ecu-accelerator-pedal-throttle-valve-resets/

Will adding spacers affect the steering geometry? I need my four wheel alignment setting up as I've just changed all the camber bolts, should I fit my spacers before or after setup, or will it not make any difference?