Chris141084

Haha that's true, not the best looking stuff. As said above, fuel line would work too

My biggest questions are, do I need to use a 2 or 3 port catch can? Would there be any advantages/disadvantages in only running a catch can from one bank instead of both

I would see where you nearest hydraulic supplier is, I'll be going to carlton hydraulics near me and asking for some pipe rated to carry oil so it doesn't degrade. Clear plastic hose should do the trick tho

1 hour ago, Rob350 said:

 

So it works then... I'm glad to hear, I wasn't to sure on what the little bottle thing was he was using, I ebayed the he'll out of it to find that I think its an inline air compressor filter, so iv just bought 1 of these http://www.ebay.co.uk/itm/272173192241 and I'll see how it goes. Just need to buy hose and 2 1/4 inch threaded to 10mm hose pipe connector bits and I'll see how it goes..

I'm trying to find out where the passenger side pcv is??  so i can make 1 for that side also 

Passenger side pcv is on the back of the rocker cover, under the throttle body

No worries mate, did you have to buy your pipe work separately, or did it come as a kit? 

17 hours ago, nissanman312 said:

I use 2 mishimoto compact cans 

Not the cheapest but do seem to work well 

Do you use one for each bank? 

Engine bay is looking well mate, do you have the piping to go with the can? 

Have either of you got any pics of them fitted? I'll keep that I'm mind cheers mate, I'm buying decats when I get paid, so will probably be after Christmas  when I buy one

I'm looking to fit an oil catch can, question is, which one? Not looking to spend a fortune, but don't want an eBay special either 

Does anyone know the part numbers of the fuel tank sender units and o rings? It's about time I got round to sorting this common fault

I also have a rear arm, I'm in Conisbrough, South Yorkshire 

Thanks guys, I'll drop him a pm 

My bolts were seized, but, a little wd40 and a few good hits and they came out, so didn't need to change the bushes

These are the part numbers of the rear alignment bolts and nuts, not sure about the bushes

Has anyone had their leather seats, steering wheel etc retrimmed? Where did you have it done and how much did it cost? 

Where abouts are you? They look like they are really easy to fit. Altho I am a mechanic so I would think that. What aren't you sure about? 

Do you have the fitting kit for the divider? 

Massive thank you to Lexx and the team for yesterday! Had a great day and evening 

Nice to see friends old and meet some new ones 

Shame there was no sun, so here is a little video of mine now the sun is out at home 

MOV_0430.mp4

Just had a look mate, they are the V103F

Pm Adrian@torqen he sells a really nice aluminium under tray, failing that pm zmanalex he may have one

Have you got one sorted? I have a pair of yokohama advan sports on my old wheels. Still loads of tread left as I hadn't had them on long before buying new wheels

I'm working both those days ðŸ™

Hopefully being delivered on Monday so I will fit them in the evening. Can post back and let you know if you like.

Thanks, that would be great ðŸ‘

That's a big coincidence.. I tried fitting my tonneau cover today and am missing the same fittings you're talking about.

 

I just ordered mine here: http://www.ebay.co.uk/itm/361830776095

 

I got the the thread sizes from another thread on the forum, M4 x 11 (0-2mm).

Did these work OK?

As title says I'm after the fixings for the boot divider that fits under the rear strut brace. I have all the brackets but no fixings for the top brackets