AdamTSmith350

For a while now I’ve been contemplating getting a nismo v3 front bumper (https://www.tarmacsportz.co.uk/nissan/nissan-350z/kbd-nissan-350z-03-08-n3-r-style-1-piece-polyurethane-front-bumper.html) , or something of that style for the girl. Come across the chargespeed T-2 kit and wondered if anyone knew where to acquire one in the uk or something similar and rough prices? Please and Thanks

Alright Alex, done some sniffing around and your right on raising the budget, what kit/bits would you recommend?

I don’t have a specific brand in mind thats just a full kit that I found. If you know of any better kits please share, as you can probably tell I could do with all the guidance I can get.

Fair enough, so be looking at something like; https://www.tarmacsportz.co.uk/xtreme-clutch-nissan-350z-z33-vq35hr-engine-370z-z34-vq37hr-engine-05-clutches.html?gclid=EAIaIQobChMIxdWen5PT5AIVCLDtCh0QhwAcEAQYASABEgLBUPD_BwE plus fitting is what your saying?

That is not ideal, got a little play in the budget but not really £600 worth of play. what about if I go for a lower spec, stage 1 or something? Something like; https://www.torqen.uk/nissan/350z/powertrain/clutch-flywheel-packs/13860-350z-hr-competition-clutch-light-flywheel-pack-stage-1-2-630-6st6073-2400.html or; https://www.torqen.uk/nissan/350z/powertrain/clutch-flywheel-packs/1896-350z-hr-jwt-jim-wolf-technology-flywheel-and-clutch-kit-14lb-light-flywheel-and-1200kg-clutch-l3507-nchroktb.html these seem to be sitting around £900 plus fitting? Although I don’t have much knowledge when it comes to clutches so I don’t know if they’re worth it?

Sorry if I’m wrong section. So the time has come, clutch as been on way out for a little while now, release bearings noisy and now started slipping so a replacement is due. Don’t see the point of putting stock back on a car I’m slowly upgrading so looking for any suggestions and prices for a decent stage 2 clutch and fly wheel, Not got a massive budget so hoping for around £1000 all in. Clutch flywheel and fitting. Any help would be appreciated. I’m located in the Nottingham area. Thanks.

Yeah that was me aha, risked it. I went back to it a few time ms theoughout the day but couldn't see anyone any of the times I called back. Have to do it again next time. í ½í±í ¼í¿¼

Great day glad i could have joined in, even if i didnt see any of you to chat.

I need some help with my breaks as i have come to the point where i am stummped. It all started with my orignals started being noisey (passenger back). So naturally i checked the pads, which honestly had seen better days. Checked the disks, were past where i would have liked them to be too. New disks and brembo pads were then instantly ordered and delivered. At this point i would like to add that copper slip was used upon install. Success! or so i thought... a mile or two later it came back!! which lead to a drastic re-clean of the breaks to ensure that there was nothing causing it. Nothing, ordered some shims.. which have came and fitted.. Success again?! Nope... So whats up..?

Next to Mansfield modified, Should make are cars look even better! Aha

If anyone drops out could you drop me a pm, only just noticed this thread and gutted that the stand is full already. would have loved a day with the zeds

Do you do the '350' badge in gloss black too?

Looking to buy a nismo v2 spoiler for my Z

Tried looking through the threads but cant find anything to answer my question. Does a nismo v3 bumper fit my '08 HR Z? without bodging it on..?