Lipsylee

Car fixed thanks mark for doing the ecu

Hello mark , right I got on to them and the reg was L77YES and previous reg was : WP52ZKM CHASSIS NUMBER : Z33000812 Coupe engine no : NK

Ok well mine is a auto , I can try and find the details for the one I just bought , Would it still be the same if I got the exact part number ecu ? I have to make a choice by the morning to either send it back for a refund and try and find the exact matching ecu or Keep it and hope it will be fine Thanks lee

Ok well that's the bit I was going to get nissan to do - recode the ecu to work with my key . So I just need to know if the ecu can work as the last four digits are different on the long part number Thanks lee

Hello people , I just bought an ecm for my nissan 350z 2003 jdm and they sent me a slightly different one - the last four digits are different , will it work in my car ? Here is my ecu part number : PL. MEC31-570 E2 3205 Here's the part number they sent me : PL. MEC31-570 E2 2717 I just spoke to nissan dealer and they couldn't answer if it will work and can be recorded as they have never recoded a used ecu !!!! Thanks lee

as above I need a auto gearbox bottom tray or under tray as mine is rusty and leaking a bit please .

Problem is still there even with the new board in . It's doing my head in !!!!! Any other ideas ?

Old problem that still causing me grief , Originally bought with electrical problem NO THROTTLE ! Anyway I changed the pedal sensor and throttle body / sensor and nothing then we took looked at the fuse board and it looked like it may have had a bit of water behind the relay , my mechanic stripped the throttle relay down and tripped the relay and it reved up for the first time , So he said by a new fuse board which I did . I fitted it and the problem didn't go away even with a new board . Very confused now . We have put a new engine in and now got to work out this problem out again . Anyone got any ideas what can now be causing this . The fault codes are the same from before . Thanks lee.

Morning all , I thought I solved the problem but obviously not ! I took the throttle relay apart and tripped the relay and it reved , so looked behind the board and it looked as if the board had a bit of water corrosion on it as it was slightly green behind the relay any way ordered a new fuse board and fitting it and guess what it still don't Rev !!!! It's very strange so I'm thinking it must be a wire behind the throttle relay that's faulty between the throttle relay and the ecm . Anyone heard of that ?

FIXED

FOUND THE FAULT ! It IS THE IPDR FUSE BOX !!

Ok will do I thought he might be the man haha Just got to work out how to pm Cheers

Solved the p1222 problem and p1226 and it's the throttle relay in the fuse box not working correctly , it looks as tho it's corroded in the board pins . So I need a new board with Serial number : 0899 3b05 284b7al505 Does anyone have any for sale that match please ? Thanks lee.

Found the fault now finally !!!! It is the IPDM E/R board faulty !!! Thanks for all the messages

ALEX IF I NEED A ECU , you will be my first call haha