Tea and wax
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Tea and wax
-
-
Use paints4u pal. Better quality
Sent from my SM-G900F using Tapatalk
What's the delivery time like?
Sent from my iPhone using Tapatalk
-
I can't help with how to remove the stuff as I've not tried on this car. For the most part, check behind the badge , if there's no fixings then it'll be bonded down. If you don't want to mask them on the car, then use heat to get them off
With regards to painting, you would usually sand down an area but with badges you don't always need to. If you choose to sand, make sure you use a fine grit so as not to put marks in the badges that will show up through the paint. Anything that's got that really shiny chrome look will probably need a fine sand down to help the paint stick.
Either way, use plastic primer for the badges and normal primer for the handles. Few coats of primer, few coats of base colour. Few coats of lacquer. Done
Normal car spray paint will be fine, unless you want them Matt or with a flake. Or plastidipped
With regards to propping things open, be careful as the paint will clog up in any hinges or joints. If you can, dismantle and paint then reassemble.
If you live near me , bring it round. Good luck with it , get messages up if you get stuck.
Sent from my iPhone using Tapatalk
-
As a brand new owner of a zed id love to come to a proper car meet full of enthusiasts. Any events coming up within an hour or so of MK this year? Would love to see what people have done with their zeds.
Where abouts do you live?
Sent from my iPhone using Tapatalk
-
1. 370Ad - Stand Pass + Track Time
2. MrsNiki - Stand Pass only
3. Rickdon - Stand Pass maybe track time
4. Stuggerz - Stand Pass only
5. Valy - Stand Pass
6. glrnet -Stand Pass
7. Ogman - Stand Pass + Track Time (as it's my birthday)
8. Chippychip123- Stand Pass
9. Ozzy225 - Stand Pass + Track time
10. Shezza - Stand Pass
11. Roobies8 - Stand Pass only
12. AdamTSmith350 - Stand Pass only
13. Garygranite - Stand Pass
14. Chizzz - Stand Pass
15. Tea and Wax - Stand pass
Sent from my iPhone using Tapatalk
-
Feels weird, no mention of tofu
He doesn't start every episode by jacking up the car either ðŸ˜
MCM are doing the supercharging of moogs mini at the moment , it's a little boring actually so I've started watching b is for build more ðŸ‘
Sent from my iPhone using Tapatalk
-
Flashed at me as it was turning off the roundabout, heading into st ives town. Looked very tidy , gave you a wave but was trying to negotiate a roundabout so couldn't hang about.
Sent from my iPhone using Tapatalk
-
If anyone is like me and spends time trawling through YouTube searching for car stuff , have a look at the channel "B is for Build".
It's some bloke in America that rebuilds crashed cars but he does most of the work himself. Like spraying. Outside. In his back garden. It's a pretty down to earth build that most of us will have attempted to do at some point in our automotive fixing life. If you like the rat look and rocket bunny approach you'll like his BRZ.
Anyway yeah, good videos, like mighty car mods but with less money.
Sent from my iPhone using Tapatalk
-
My own solution
Sting them mate there idiots
If that's your boot install , then that is a very tidy looking install. Like that ðŸ‘
Sent from my iPhone using Tapatalk
- 2
-
Do some Vlogging, it's really easy
Sent from my iPhone using Tapatalk
-
What other games is do you all play?
Sent from my iPhone using Tapatalk
-
I watched this earlier , sounds nice.
Sent from my iPhone using Tapatalk
-
Ah the old 370z chicken fault. It's common from what I've heard. Something to do with the poultry linkage at the rear of the car.
Sent from my iPhone using Tapatalk
- 1
-
I know there's a few hairy bikers on here, just wondered if anyone can help.
So I've had a lot on my plate this year and Bandit hasnt moved apart from house move circa 2 miles down the road.
It's not starting, it is turning over but not firing up. Garage said could be stale fuel, so I drained the carbs out and fillied the tank up with fresh Vpower (but there was probably 1/4 tank of old stuff in there). still not starting.
Do I need to empty it completely or is there anything like an Octane booster I could drop in that might help.
I've not looked at plugs or anything else at this point.
Any advise would be much appreciated.
depends on how equipped you are and how comfortable you feel with taking things apart.
Mines Constantly in bits so I'm used to chasing gremlins and figuring out what is stopping it firing. Usually it's muggins here that's forgot to plug something back in!!!!
Go through the usual list and think of fuel, air and spark. Start off with the easy things that can be done without the tank off like battery , fresh fuel , checking fuel taps n cut off switches, fuses, dodgy alarms etc.
Regardless of how much further you go, probably the easiest thing ever.... Drop the oil and put a new filter on.
If you then decide the tanks coming off, do the plugs, dismantle the carbs and clean them then try it all again.
One question from me, when you try it on the button, does it try to fire, even with a slight bit of throttle, or does it just keep turning ?
If all that fails, find out which one of us lives closest to you and bribe them to come round with offers of tea and biscuits ☕ï¸ðŸ‘
Sent from my iPhone using Tapatalk
- 1
-
I'm looking to attend my first meet but struggling to find one close to Milton Keynes. Don't mind travelling up to an hour.
Any planned meets anybody out there know about?
There's usually a JDM fresh meet in Northampton or some jap meets in Cambridge. I've travelled over to MK for meets before so there must be some over your way????
Sent from my iPhone using Tapatalk
-
I'm going to be travelling back up north next weekend. Was thinking of having a trip over to Sherburn cafe for a brew on the Sunday simply because I haven't been in ages. If any of you fancy a trip over let me know and I'll hang about for a chat ☕ï¸ðŸ‘
Sent from my iPhone using Tapatalk
-
Why wait til 3rd November? Get some practise in and come to Helmsley 😄
Where's Helmsley ?
Sent from my iPhone using Tapatalk
-
I'm from West Yorkshire but moved away. Best thing to do would be to meet at Sherburn cafe for the jap meet once a month or find another place similar to that.
Drop me a message if you arrange a date and I'll travel home for it
Sent from my iPhone using Tapatalk
-
You can destroy the anti air radar trucks and blue radio control terminals with anything explosive. Just walk up to the generators and then them off ( though you need to leg it cos guards will come and turn them back on). I'm on about 70% complete now and all the way through the one thing I though was how good it would be as a 2 player co-op game.
Sent from my iPhone using Tapatalk
-
I've had a fair few pads and discs combination on my old car, everything from stock to drilled, grooved and coloured. With brand new pads in my old one used to squeal under braking so in the end I took them all out and removed the arm that makes contact with the disc. That shut it up
Sent from my iPhone using Tapatalk
-
Yeah I've been to japshow this year and went to jap finale and both japshows last year. If there's going to be a forum stand then I'll be up for that, need 10 people tho usually. Anyone know the date, october something isn't it?
Sent from my iPhone using Tapatalk
-
The clocks in it are really poor compared to the design
Sent from my iPhone using Tapatalk
-
I'm on the new metal gear , done shitloads and it says I'm like 20% completed..... Gunna be there for years trying to complete it. Anyone with it know how you make that sniper woman go where you want her to go?
Sent from my iPhone using Tapatalk
-
Standard
Subaru gold (too much)
Darker gold (still too much)
Dark bronze (this is the colour I like)
Erm......
Sent from my iPhone using Tapatalk
-
Thanks Tea and Wax,really appreciate that.Think I prefer them as is.
Your welcome. Have you thought about other colours like dark gunmetal or bronze?
Sent from my iPhone using Tapatalk
Exhaust baffles?
in 350Z Technical
Posted
Have you ruled out the other bits? It's not a join in the exhaust that's gone? Not some heat shield somewhere that's loose?
Sent from my iPhone using Tapatalk