Jump to content

dann2010

Members
  • Posts

    52
  • Joined

  • Last visited

Everything posted by dann2010

  1. And this Ebay 231098804229 Sent from my GT-N7100 using Tapatalk
  2. Sorry lol Here is one ive been looking at Ebay 111684360600 Sent from my GT-N7100 using Tapatalk
  3. Brill maye Clutch is Exedy Ebay number 161274321347 Do these have dual mass or just singke flywheel... £254 Sent from my GT-N7100 using Tapatalk
  4. How much would a fly wheel cost? As i have seen a stage 2 clucth 3 peice for 365 quid and 100 quid to fit... Sent from my GT-N7100 using Tapatalk
  5. Hi guys My clutch has started slipping in 5th and 6th especially if i blip it, or even in 4th when crusing then give it a blip. 1st 2nd and 3rd seem okay, i can put foot to floor and wont miss a beat, but when i drive like a granny in higher gears it slips unless alot of power put on?? Also on shut down it sounds like a truck turning off and seems like its from engine but under centre console area? Sent from my GT-N7100 using Tapatalk
  6. Could they of over pressurized it at all? Sent from my GT-N7100 using Tapatalk
  7. Nissian Torque Show 5th july 2015 Sunderland Sent from my GT-N7100 using Tapatalk
  8. Is anyone off to the nissian show in sunderland next weekend? I am already there Sent from my GT-N7100 using Tapatalk
  9. Where did u get the clips from L9oking good mate i need to take a leaf from your book and my engine bay iys very dirty. Need to.find a decent something to clean it with. Sent from my GT-N7100 using Tapatalk
  10. There saying its not there problem as it can happen on any car, the machine past it and filled it and it woukdnt if done that if there was an issue. He then said sounds like it jasnt had aircon in for a long time... Yet i told him i used it everyday its just not as cold so reason i wanted it charging Sent from my GT-N7100 using Tapatalk
  11. Guys im getting a kind of noise on shutdown, sound like a truck shutting down but no noises while driving, sound like its engine based under the console area .... Also my clutch is slipping but strangly enough only in low revs in 5th and 6th or when i blip it but if i boot it in 1,2,3rd its fine? Sent from my GT-N7100 using Tapatalk
  12. Hi mate can i also have the part number as my window is clicking but not moving at all Sent from my GT-N7100 using Tapatalk
  13. So i went to "wilco motor save" today as its near me and i thought what can go wrong. I paid 40 quid for my aircon to be refilled... the machine did it all okay and filled her then they tested it... I went on my travels and thought id put it on for a bit and see how is... Stop at some light and BANG! Massive bang with a huge cloud of mist, and engine died... Funny enought everyone came running to my rescue but car didnt start for 10 mins after but it did finally start.. So i drove it back to "wilco" and they looked in bay and green @*!# everywwhere, they said the high pressure pipe had come apart... What are my options.... What do i need to get back air con And coukd tbey if over pressurzied it? Sent from my GT-N7100 using Tapatalk
  14. Hi guys newbie here Can some please tell me what the fairlady is? I have a 2003 zed gt uk spec... Sent from my GT-N7100 using Tapatalk
  15. Welcome .... I have a blitz induction kit on mine and wow what a beast lol very expensive bit weel worth it Sent from my GT-N7100 using Tapatalk
  16. Hi guys this maybe a newbie z owner question. In a normal car you check oil when cold but in the zed manual it says check level when at operating temp? Bit confused as going against what ive always done with it being cold Sent from my GT-N7100 using Tapatalk
  17. Do u remember the traders name at all? Sent from my GT-N7100 using Tapatalk
  18. hi guys i have just taken car into garage to put cats back on after YMS and now ive been told the flexi pioes are blowing.. is that the Y pipe? If so anyone know of a place to get them bit cheaper? Thanks Also ive just bought a new led oil pressure dial, is it easy to fit a single dial or are they in a bank of 3? Sent from my GT-N7100 using Tapatalk
  19. If your car has 2 intake pipes it's an HR, if it has one but has led rear lights and the hazard switch is in front of the gear stick its a DE rev up, otherwise it's a pre facelift DE Guys my zed is a 53 plate uk spec 50k miles Has the GT package etc. The hazard switch is near the ashtray slot, unsure of the leds in rear and only have 1 intake. Any clues as to what engine mine is and if its a decent one lol Sent from my GT-N7100 using Tapatalk Yours is gonna be 100% non rev up de engine Cheers bud Are they any good with only 50k.. Any known issues to be aware of ? Sent from my GT-N7100 using Tapatalk
  20. If your car has 2 intake pipes it's an HR, if it has one but has led rear lights and the hazard switch is in front of the gear stick its a DE rev up, otherwise it's a pre facelift DE Guys my zed is a 53 plate uk spec 50k miles Has the GT package etc. The hazard switch is near the ashtray slot, unsure of the leds in rear and only have 1 intake. Any clues as to what engine mine is and if its a decent one lol Sent from my GT-N7100 using Tapatalk
  21. I cant for the life of me get my big hands in there or my 6'4 body lol when i do, the nut is in mid turn so havent got enough room to lock on to it? Anyone in north yorkshire able to help for some pennies. Thanks Sent from my GT-N7100 using Tapatalk
  22. Yea not sure what bumper it is tbh lol Sent from my GT-N7100 using Tapatalk
  23. No worries I dont have a stick lol i have a sensor for remote May have to either replace it for a touchscreen to work with the birdview or install a different unit Thanks Sent from my GT-N7100 using Tapatalk
  24. Ah okay lol Everydays a school day lol Sent from my GT-N7100 using Tapatalk
  25. Do u have the remote for satnav? If u intend on upgrading will u sell the remote? Sent from my GT-N7100 using Tapatalk
×
×
  • Create New...