When I put my clutch down when I'm moving forwards my clutch keep Erving between 1 and 2 thousand revs
https://vimeo.com/144276563
Video attached
350z 57 plate HR
Sent from my iPhone using Tapatalk
Yh that's what I read but as it was pink before I used pink again to stop that from happening ... Also ran water through it
Yh didn't use the bleed valve
Plus when i leave the rad cap of to let bubbles come out it keeps over flowing!
Only had it running for 10 -15 mins or so
Sent from my iPhone using Tapatalk
ok thanks !
I've drained my coolant from the Rad and then filled back up with water ... ran it for 10 mins then drained again
(both times just used the bolt under the RAD) ... and filled with comma coolant (pink) last owner had pink in there so used the same
didn't use any bleed valve .... then once the coolant was brimmed at the top of the RAD cap ran it for 10 mins to let bubbles come out but didn't get much lower just a little top up hear and there for the last few days ...
don't have any coolant in the overflow tank was confused to see how the water went back in and thought it was a bit pointless but the vacuum it creates makes sense! so shall i just add count to the overflow to the max ?
as long as no more bubbles come out of the Rad cap and i fill the overflow I'm good yh ? (again didn't use any bleed valve)
Where is this hose supposed to go comes of my over flow tank to nothing
I don't have any coolant in my overflow tank either ... is that ok ? guessing it just hasn't over flowed ...
Can't se how coolant can go back into the system if there is only one pipe going in from the Rad cap on top of the thermostat (left side) and then the right side pipe doesn't go anywhere :s
(I've just drained coolant out and replaced) 350z HR 57 plate
For my 57 plate HR 313
Been given two different part numbers Opie oils say i need vfxeh22
but then euro car parts say FXE22HR-11
Both denso
What one is it guys ? lol
Got at 57 plate HR can I buy wheel spacers just for any 350z or is it different for the HR
(Standard Rays)
Also I've been told 20mm front 25 back will sit the wheels flush
Can I go 25 front 30 back ?
And lastly anyone recommend a make ?
Yours sincerely
350z Noob
Sent from my iPhone using Tapatalk
anyone know where i can find info on how to remove my bose cd player .. i have the sat nav built in and all the stuff i can find is all 350z without the sat nav
57 350z HR
all i can find is information on how to remove it with the cubby hole so can get the the 2 top screws easy but i have a sat nav that looks like i need to get out the way
Is there anyone that can do this ? i found someone in amerce that can but too far away .. i can't use a soldering iron, tried once before didn't end well...
I want both my Volts, Oil, and comp gauge done and speedo clocks
Anyone change speedo clocks and volt oils and comp clocks led's?
I no you have to solder the leds on so a bit of a pain for someone that can't solder !
I no of someone in America that does it but his too far
Anyone around that can do them ?
Sent from my iPhone using Tapatalk
Simple question I hope
How do you change the voltage oil pressure and speedo meter computer to a different colour LED do I need to change any backing or coloured film or is it just a straightforward LED swap?
Also what LED's do I need??
Can I also change the LEDs for the buttons that control my sat nav ? (350z HR)
And is there any backing or coloured film to that too or just an LED swap
Same again for the speedo clocks
Want them all white
I was asking more about the angel eyes coz some of the lights on other cars just have standard LED in them and can only been seen at night and you need to take them apart and put in the DRL engel rings
Sent from my iPhone using Tapatalk
I've got a 57 late HR and what to get angel eye headlight .. Is it a case of Getting any angel eye headlights from eBay and then having to upgrade the angel eyes and the 5 led,s
Or can some headlight no be taken apart ?
Looking to get this style
http://pages.ebay.com/link/?nav=item.view&alt=web&id=360420426401&globalID=EBAY-GB
Sent from my iPhone using Tapatalk
My side mirror adjustment isn't on t new z and looks like there might be a bit of it stuck in where it's meant to go... How to I take it apart to push it back in ?
Sent from my iPhone using Tapatalk
Took it to the garage as the steering wheel is off .. It's got a bent track rod and I can't remember the name of the bush just next to the track rod it's quite big about the size of a fist and Circular and I think the sub frame sits in it .. One if them is bent so waiting for prices
Sent from my iPhone using Tapatalk
Thanks guys i got it now all seems good! Love it!!
Few little bits i want some of you to look over maybe at the next meet you do so expect me there lol
When depressing the clutch its sounds a bit quieter and then bringing it back up i can hear a little thud or rattle not sure how to describe... seems fine though not sure if its normal ( all standard )
http://pages.ebay.com/link/?nav=item.view&alt=web&id=161728797425&globalID=EBAY-GB
I know about the cat c but in general what should I look for ? Any common problems ????