Tuck

I tried to PM you, you're inbox is full up! Dibs if you'll do it for £40 😉

Sent from my iPhone using Tapatalk

Cheers lads, the front had the 20mm spacers to clear the calipers so just need 25mm spacer for the rear!

Sent from my iPhone using Tapatalk

Needs updating...

Sent from my iPhone using Tapatalk

 

 

 

I had a slight rub on full lock but nothing serious and I had to tuck the outer arch a tiny bit in the middle but it was so slight I did it by hand.

Is that with eibach springs yeah? I'm looking to put spacers on too but I'm thinking it may rub quite a bit 😠even with the made up tyre size they have fitted

Sent from my iPhone using Tapatalk

Pm Keyser or Buster on here I think they will know the answer

 

Buster is the tyre size guru - but he is away at the moment - try a PM he may still pick them up

Cheers I'll fire him a pm

Sent from my iPhone using Tapatalk

Tyres are standard for a 370z 245/35/19 front and 275/35/19 rears

 

 

Sent from my iPhone using Tapatalk

 

Tyres are standard for a 370z 245/40/19 front and 275/35/19 rears

 

Sure? That's the sizes costco Michelin gave me for a 370z... but then again it is costco

 

 

Sent from my iPhone using Tapatalk

 

Okay cheers, I'll bare that in mind as the dealer has fitted a lovely set of ditchfinders to the front. But the 35 side wall would be shorter so that would fill the gap even more than it already does!

 

Positive

Sent from my iPhone using Tapatalk

Tyres are standard for a 370z 245/35/19 front and 275/35/19 rears

 

 

Sent from my iPhone using Tapatalk

 

Tyres are standard for a 370z 245/40/19 front and 275/35/19 rears

Sure? That's the sizes costco Michelin gave me for a 370z... but then again it is costco

Sent from my iPhone using Tapatalk

Tyres are standard for a 370z 245/35/19 front and 275/35/19 rears

Sent from my iPhone using Tapatalk

Here's a pic, seems already quite low at the front

Sent from my iPhone using Tapatalk

So I've been specing up lowering springs as I rarely get on the track with my cars, so after researching the forum the choice is between eibach (30mm) and Tein (17mmF/14mmR) and after looking at other peoples zeds I'm inclined to go with the eibach (a very nice price supplied by Ewan at Clarks) the only problem I have is that after measuring arch gap standard (approx 50mm front & 35mm Front) with the 370z alloys (19') is that the front is going to be very close to the arches with spacers fitted! Does anyone have pictures of thier 350 on 19s with either spring fitted? I've scoured the forum but only found pictures with the standard 18s

Seems to be few z owners here in Aberdeen, need to get some meets sorted so I can decide on the next mods to fit! Dare say the wallet will be empty for the couple of months

Wow, that's quite a welcome! Cheers guys, no pictures yet as she's covered already so I'll give her a clean and take a few and start a progress thread!

So I just picked up my 2005 350z, and love it! Bit of a step up from my RS Clio 200 and loving the rear wheel drive! Only thing is the front lifts a lot when giving it rice, so some bushes will be on order. Looking for some coilies or decent springs too and a set of spacers to compliment the 370z alloys that are fitted! As for the tape player I was rather amazed that it had one, surely tapes died off before 2005?! anyway, it's a nice car but needs a few bits to personalise it a bit, any other z owners around these parts?

These exhausts you see on ebay (highly polished & cheap) are unbranded toyosports parts. They aren't a brilliant fit, if fitting a decat manifold to my old clio rs200 is anything to go by. As for MOT it really depends on how vigilant the tester is, My old car passed with no advisories having the main cat and resonator removed. Yet I've heard its not uncommon for a tester to fail a car with the main cat removed but still passing emissions.