mattbrom
-
Posts
140 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by mattbrom
-
-
My mate just bought himself an Evo MR 360 HKS edition. Which I must add is an absolute beast! It came with xxr 527s - brilliant! I thought i'll get him to sell them...to me
He is looking for the original MR speed lines now. BONUS! So I went to try his wheels on to see if I actually like them.
Took pictures!
I like them a lot the car will need to be lowered possibly on springs.
What in planning on doing is I read that you need the fronts to be thinner in width than the rear otherwise it messes up the traction control so I was planning on putting 245 width on the front and 265 on the rears hopefully that'll work
Sent from my iPhone using Tapatalk
- 1
-
Hey, sorry to say I'm not that impressed by the washer covers, I too work in carbon, but made out of pre preg they would look so much better, I'm sure you could scrounge some off cut material from work and chuck them in the clave. Most places I have worked (im a contractor) are pretty easy going and would unlikely to put up much of a fuss.
Though I'm guessing you have made them from wet lay, the weave is quite distorted, I know its tricky with dry cloth....
Otherwise, I think its time my black zed got the same polish/wax treatment, yours looks very shiny! Mine is a swirly bastard
Yeah I know! When I put them in a vac bag the weave distorted I'm going to try a different way of doing them I'd rather not ask if I'm honest mate they might not like it :/
Yeah get on it! There's nothing better than a clean black car...until you take it 2mile down the road and it's crapped up again
Sent from my iPhone using Tapatalk
-
I'm going to make myself a slam panel out of carbon fibre this week I have some carbon left over from when I made some bits for my racing car
It's a 1.4 rover k series turbo which was a prototype engine that came out of the factory producing 400bhp in a 400kg car
I have an onboard video of a test day.
Anyway I might use this biaxle weave carbon with the red tracer in it
Sent from my iPhone using Tapatalk
-
Also quick one I took the back box off my car and it sounded awesome! My mate took a quick vid of it
Sent from my iPhone using Tapatalk
- 1
-
Very nice, anything else planned?
I'd like to get wheels next my candidates are..
BBS CH reps
Calibre GTR
XXR 527
Sent from my iPhone using Tapatalk
-
One thing that I believe ruins the front end on these cars are the number plate holder so I set out putting a vinyl one on
I filled in the four holes with fibre glass and smoothed it out.
I haven't got any pictures of the process but got final outcome
The 'F' looks out of place but it isn't it's the curvature of the bumper
As you can see in the picture I went about polishing the headlights
Got myself some autoglym interior cleaning kit
I'll start it tomorrow
Sent from my iPhone using Tapatalk
-
Has anyone used these sports cats?
What are they like?
http://www.ebay.co.uk/itm/231226023116
Sent from my iPhone using Tapatalk
-
Today was so nice and the zed was real dirty
My mate gave me some carnauba wax that he had I gave her a wash and applied the DoDo juice pre wax and then the wax
I am real pleased on how it came out
Sent from my iPhone using Tapatalk
- 1
-
This is definitely on my mod list to do soon
Get on it mate
Sent from my iPhone using Tapatalk
-
Sounds amazing! whats it like inside? any drone at all?
Sounds awesome inside! Doesn't drone at all
Sent from my iPhone using Tapatalk
- 1
-
Sent from my iPhone using Tapatalk
-
-
Installed the cobra guys i haven't got pictures of it done as it was dark but I was surprised how much smaller the cobra back box is compared to oem!
Took a quick video of how the car sounded without the back box and mid pipe.
Check it out on my Instagram as I can't add it on here. @mattbrom
I went on a little test drive sounds real nice! No drone whatsoever with the resonated system
Sent from my iPhone using Tapatalk
- 1
-
It's finally come! Resonated cobra exhaust can't wait to fit it either tonight or tomorrow
Sent from my iPhone using Tapatalk
- 2
-
Cheers guys, feel very welcomed. Plan is to hit derby meets, when's the next one?
The meet is at 7:00pm - 7th June - pride park:)
https://m.facebook.com/DerbyCarMeetsUk?fref=nf
Sent from my iPhone using Tapatalk
-
Mine came today cheers CS! Fitting tomorrow
Sent from my iPhone using Tapatalk
-
Welcome, I'm in derby also! good to see you if you take your car to one of the derby car meets
Sent from my iPhone using Tapatalk
-
Since last week I've noticed a knock on the front of the car more specifically when I braked you could feel the knock in the car. So I whipped the wheels off seen that my compression arm ball joint was knacked. I then got worried because I'm going up to British super bikes on Monday as we got free tickets through work
So I went on eBay searching for a new arm and these were the only ones I could find! http://www.ebay.co.uk/itm/331157233015
So went up to dewsbury with mrs driving as I didn't trust the zed! Bought the arm and got straight back to fit it!
It's a pretty easy job loosen off the brace under the gearbox and obviously the compression arm nut.
Then the ball joint which attaches to the hub was just moving in the cup when I tried to get it off so got my trusty angle grinder and took the f**cker off!
Job done now fitted the new arm.
Sent from my iPhone using Tapatalk
- 1
-
Seen red 06 coming on to a52 through borrowash wondering if it's anyone on here
Sent from my iPhone using Tapatalk
-
Here you go chaps...looks nice and discrete in the day light
Sent from my iPhone using Tapatalk
- 1
-
Very nice and I'm a big fan of carbon fibre parts so loving the headlight washer covers.
Hey man those CF bits would look sweet on your car
Sent from my iPhone using Tapatalk
Think they work better on a black Zed tbh but some Carbon Fibre bits for my car is definitely on the cards.
Got a CF slam panel already, bonnet struts and some hydro dipped interior parts on their way so it's definitely a theme I want to continue on my Gun Metal Zed.
Let us know if you start trading.
Yeah black looks well with CF but again I think CF looks good with any colour haha you're getting to be a true fan of carbon
I've already got some ideas regarding carbon fibre bits for the zeds so if I get enough interest i'll have a go at being a trader
Sent from my iPhone using Tapatalk
-
Love that little flash of carbon!
Nice zed. In the best colour too.
Definitely best colour! Hard to keep clean though
Cheers mate I'm loving the positive feedback
Sent from my iPhone using Tapatalk
-
Very nice and I'm a big fan of carbon fibre parts so loving the headlight washer covers.
Hey man those CF bits would look sweet on your car
Sent from my iPhone using Tapatalk
-
Nice work. Leds are a good choice and that odb reader is nice and cheap! Might have to have a look for one of them now.
Once you start making changes it won't stop lol
Like the carbon on the washer covers. Don't know how it would look with a different colour but the black works I think.
Cheers mate! Here is the one I bought off eBay http://www.ebay.co.uk/itm/231188501160
If you have an iPhone you need the wifi obd2 module but if you've got an android phone the you can get the bluetooth module
I think the carbon fibre would look good on other colours we'd have to try it
Sent from my iPhone using Tapatalk
2 zeds at MFN tonight!
in Spotted or Flyered
Posted
There was two zeds at MFN meet tonight a red fair lady which was for sale and a blue one with loads of carbon on!
I was there with my beast
Sent from my iPhone using Tapatalk