TomLum
-
Posts
198 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by TomLum
-
-
Hey guys, I had put 30mm spacers on the rear a couple months back and was waiting for some decent 25mm ones to go on the front. Now its all done I love the look and no rubbing issues at all. I know alot of people go 20/25 but I thought I would put this up incase people were curious to go that little extra. Anyway here are some before and after shots
Rear
Front
- 2
-
Hi and welcome. I found the same issue with noise like yourself. I bought an R35 GTR backbox and had it fabricated for my 350z. Now it sounds wonderful! Alot more raw v6 sound with no droaning. Here is a video. Very hard to capture the true sound but its the best clip I have currently
-
-
-
No one tried this yet? Am i gonna be the guinea pig and buy one to find out
-
Just to be clear all the nav electronics will be removed and replaced by my Nexus, im just asking if the later plastic trim will fit
-
Hi im about to start my Nexus tablet install and have a quick question. I currently have the push button retractable lid with factory sat nav behind it (2004 model) However is it possible to fit the following console in my car? Or is it a differnt fitment? Thanks for any help. Tom
-
Is it just my wonky eyes or dies the S look a little bigger or higher?
In the photos the letters were just tacked on. Its all been measured out and leveled now there attached.
-
Yes letters are plywood to and covered in coloured carpet. Thanks for the comments guys
-
What u make it out off Mdf?
Sent from my iPhone using Tapatalk
Its all made from plywood
-
Hi guys, Ive had some people contacting me about my NISMO boot divider ive made in my profile picture. So ive made another and its up on eBay.
Tom
http://www.ebay.co.uk/itm/251440314572?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
-
Had a few emails about this. But I'm going to let the auction run. 2 days left on it
-
I guess you don't want the one I made for you and was holding on to for you to collect then Tom
At least it'll help me chip away at the waiting list! GLWTS, mine always went well on eBay.
Hi sorry I didnt message you. As I said I was in no rush for one and since then a good friend of mine offered to make me one in his spare time. He made me two one ive now got in my car (see below) and the other im selling for him to cover his materiels and time.
This is the other one now in my car..
- 1
-
Mine did this for a couple of days untill I found a tiny flying bug in the cabin! I pursuaded him out and its not done it since. Sounds funny but it was setting the alarm off!
-
My boot divider for sale. Un-used.
http://www.ebay.co.uk/itm/251434043154?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
-
Hi ive been offered a genuine chargespeed rear bumper for a very good price. However is the diffuser a seperate piece as im not sure it comes with it? If it is can you supply a replica as I understand you have moulds. Thanks for any help and advice. I did try and PM you but your not recieving messages.
Tom
-
just an update, both things fixed, sorted and complete.
steering wheel controls were not working because I had it in the wrong aux port (there was 2 at the back) lol
and managed to get the floor out, need to pull something to one side on the cradle to expose a screw, undo that and then it lifts out not have my iphone cable dangling in that now
cheers for the replies guys
Glad you sorted it! Simple but handy mod
-
As always they always sound better in real life! Very hard to capture the true sound on my camera.
I know you say it was a cold start but that is somewhat smokeyHaha it was -3 here today so very smokey!
-
shame its not the four tips which would then proper nod to where it came from. Well done though. Looking forward to hearing a sound clip
I was tempted but thought the tips are that big it may look a bit fast and furious like that, and Im thinking of fitting the chargespeed rear at some point so would want them to fit the carbon diffuser.
-
Quick video I made. Let me know what you think
-
Look's great from what I can see TomLum.
Just need to hear it now.
Video will be up tommorow when i get in for work
-
o really, that sounds like what i was hoping to hear i did try pulling it, just obviously not hard enough, did you drill a hole in it i take it?
Cant remember exactly but certainly no drilling! There is a hole to allow the cable for the phone cradle i think? I removed the phone cradle and used the existing hole.
-
You dont need to take the whole center out. Just the gear surround then feed it through under the storage area. The center of the base pulls out and you can feed it through. I did this with my aux a couple of weeks ago. Can get a photo tommorow if it will help
-
looks good mate! how do you find the sound!
interestingly a slighlty different approach to fitting it compared to mine!
I love the sound! Not boomy just more throaty. The rest of my system is stock though. Yea I told the guy I wanted it to look OEM with minimal bends and for it to mate with the existing center silencer and I think he has done a great job
My Gia Cuzzo rear spoiler, potentially one for sale?
in Styling
Posted · Edited by TomLum
Hey guys took delivery of two of these rear spoilers the other day. One for me and one for a mate. He has since bought a Nismo wing. Now I have a spare im thinking of putting it up for sale in the next couple weeks. I would just be after what I paid for it.
I just popped it on the car to get a snap and see what you guys think to these. I love it. Fitment is perfect when pressed onto the car. In the pics its just balancing so doesnt look its best and of course only in primer!
How would you recommend have it fitted? Is adheasive strong enough or do people drill and bolt these?