timb2010

Cheers buddy. I thought It may have been a bolt to keep the disks located or something that someone had lost the bolt and put a long bolt and spacer on! Stress over.. JUST REALISED I FORGOT BEFORE PHOTOS!!!

Hi, Ive just gone to put my front spacers on and found this thing sticking out between the two studs? Surely that's not normal!!! Please can anyone advise! Car is jacked up with the wheel off!!

Guys JDM have come back to me with £110 delivered for a full set of billet steel 20/25 spacers. Were the comment about wheels falling off in jest? Or should I be concerned? On a budget as I still haven't sold my previous car and this seems a really attractive price! Is this one those cases where you get what you pay for? Thank you! http://www.ebay.co.u...=item337e85cf3f http://www.ebay.co.uk/itm/JDM-R-Pair-of-Mazda-Mitsubishi-Hubcentric-Wheel-Spacers-5x114-3-67-1-20mm-RX8-/321040384304?pt=UK_Cars_Parts_Vehicles_Wheels_tyre_Trims_Trims_ET&fits=Model%3A350+Z&hash=item4abf7f8130

I won't need the arches rolled or anything to use eibachs will I? And they will fit the normal tourer 18s as well as Rays? Thankyou

Haha love it! I don't want that. Thanks

Pm sent !

There are some steel ones on eBay by JDM for around 140. What are the advantages of eibach over these, does anyone please know?

As above please. Anything considered as long as they are hubcentric and not just spacers. Always had judder and wobble on old car with this type!

Hi Dave. My plan was to buy these, swap my tyres and sell mine. (Identical but in silver). I'm really sorry but I've seen these just aren't selling on eBay. I think I would end up with 2 sets of wheels. The cost for delivery, tyre swaps and relisted of old wheels would add up. I saw this a chance to change my wheel colour cheaply. Even though this is a bargain I think I'm going to have to back out. I'm really sorry and hope you don't think I've mesed you around. Hopefully bbk will snap them up! Tim

Thanks all. For my BMW there was a site www.realOEM.com that had every part with exploded diagrams. Is there something similar for the zed ?

Not those mate. Between those there is an area on both bumper and lip where it looks like a U clip could go,. Unless I do use those and no bolts,?

Hi. Today I removed and sanded my frontlower lip. I refurbed it with wet and dry and then finished it with plastidip. I reattached it with the 6 bolts that pin it to the bumper but noticed there are 5 areas where it looks like some clips should go. I've searched but can find any reference to these? For the one end that was slightly low I managed to run a cable through the clip area. Can anyone please advise?

Hi Dave. Sorry but posted please. I don't suppose your new wheels won't require your 20/25mm spacer ????? Thanks Tim

Thanks Dave. If could please get me the tread depths I will take you up on these. Are they off your car.? If so when could I please get me hands on them! Tim

Thank you!! Looks like I may be doing some baking tommorow Would love to get that orange strip from my headlights too....

exactly

I saw a photo today of a zed with matching clear reversing and fog lights on either side. They had by the looks of it removed the red section from the rear bumper lights Does anyone please know how to do this ? or would a light kit need to be purchased? Thanks in advance PS. Should this be in styling? or ok in General?

Hi Dave. I am definitely interested. but...Is it my eyes or do they nearly appear very dark or blackish? I was considering getting mine in anthracite after seeing the attached picture of this zed.. Are they a similar colour please..? Are all the budget tyres the same type/brand? What kind of tread is left please.? Thanks Tim

Hi mate. Might be interested. Do you please have a picture of them fitted on your gm zed? Thank you

Hi Dan. Could I please buy the Bluetooth adaptor and cradle? Thanks Tim

As per title !! Don't mind cleaning it up myself! Anything considered. Thank you

Thankyou! Found another one... Think I will do mine this weekend...

Hi, I've seen a few silvers with the lower front lip of the bumper CF wrapped or plastidipped in black but no Gun Metal Greys.,.... I've got some plastidip here ready but wondered if anyone had a picture of there's already done? Thanks in advance!!!!!

Where are you Wasso mate? I think I will have a little go on a square inch and see how it goes. Do I need to buy a grinder or similar? If so I will leave it to the pros!!!!!!

Thanks guys, maybe if I purchase a spare one so I can still run the car, I could to 20min a night or so.... (Works out to 90days!!)