eatonm90

I've checked the nuts with some plug gauges at work and it's not m10 x 1.25.

 

We thought it was 3/8 UNF but then the pitch was wrong. It seems to be M9 x 1.25........gash

Bit bizarre that, def won't be imperial size..M9 would be a specialist size. If I get time I will measure up the old ones I took off mine.

Could be a mouse

Can't find anything furry in the front.....could be my mate has dropped his wallet in there..

I have the exact same thing!! Sounds it is coming from somewhere infront of me... like the air vents that blow up on the windscreen, have continually tried to pinpoint where it is coming from.... but simply cant, and nothing i do seems to stop it!

 

you mention you think it could be a drop link, am having all of my drop links replaced this saturday, so will let you know if that solves it

Thanks Ostego, was going to spray bushes one at a time with silicone to see if it stopped..will be interested to see if yours is the anti roll links...

Kicked the passenger out because they couldn't pin point the noise either .........looks like a mission under the car next then..

Hi, Anyone had a squeek when on B roads from the passenger side front. Sounds like it's behind the dash but had it all apart checked harnesses and components made sure all was tight but still can't stop it. Starting to think it may be coming from under the car or maybe an anti roll bar link...........driving me insane....

Hi, size is M10 x 1.25. Did mine with flanged stainless nuts but could only find them on Ebay. They fit Ducatti chain sprockets I think.

Use 10mm bolts for y pipe to centre and centre to rear box, the OE cats use a fine thread stud which use M10 x 1.25mm threaded nut and not the usual M10 x 1.5mm thread.

Hope this helps.

:thumbs:Okay, thanks, will go through the wiring and hope I find something .

Few days ago my airbag light started flashing, cleared it with the ignition reset but keeps coming back. Did the flashing light diagnostics and it's telling me the RH air bag module in the seat is the malfunction. Anyone had this issue, can I test anything before thinking about getting it replaced?

:thumbs:PM sent

Great calender guy's thank you.....my first calender for many years that isn't F1 orientated

Received my Motordyne order today,....... super fast delivery.... excellent service..

Thanks very much TARMAC...

Hi Chris, am I too late for the order..

Maybe should start a 'what have you hit in your Zed today' thread...

It was the xpel film I got put on and cost 1200 for the full front end including the splitter. I think I waited about 10days after a respray before getting it put on. There is a forum discount also (5 or10%). unless your going to keep the car a few years it's not worth doing, I plan on keeping mine another while, that's why I got it done.

Thanks for the info richmillions, going to be keeping it so will probably get it done..

Yes, still a bit gutted though...but at least the deer made it...

I've had it done with the guy's that have a trader logo on here, paintshield I think. I decided to do it because I got the front end resprayed and literally 6weeks later the grey primer was very obvious on a black car. 6 months ago I had the film applied after a respray and now not a mark on the paint and one on the film which I only noticed up-close the last time I washed it. I have more details somewhere if you need.

If you have any details easily to hand would be interested.

Driving to work this morning a Muntjac deer decided to play chicken with my car, unfortunately we had a coming together. Luckily I always drive slowly through that area due to the amount off deer roadkill every week but hit it doing about 20mph by the time I had anchored up on the brakes. Deer got up and ran off but my Nismo front end didn't fair quite as well...not too bad with stress cracks on one side. It will give me an excuse to sort out the stone chips..does anyone know if having it clear wrapped after painting is worth doing? any idea of costs??

Deer - 1 Nismo V1 - 0